Product Overview

Description

Key Features

  • 12" Mid-Range
  • MAX Power: 900 Watts
  • RMS Power: 450 Watts
  • Impedance: 4 or 8-Ohm
  • Ferrite Magnet
  • 97.5dB

SPECS

SKU
PRO-X12M
Nominal Diameter
12" (308 mm)
Nominal Impedance
4 or 8 ohms
RMS Power Handing
450 Watts
Maximum Power Handing
900 Watts
Sensitivity (1w/1m)
97.5 dB
Frequency Response
63.5Hz-11.3KHz
Recommended Hi Pass Crossover
100Hz


SPECS

Voice Coil Diameter
2.5 (65.5 mm")
Voice Coil Former Material
Kapton
Winding Material
CCAW
Basket Material
Steel
Magnet Weight
60 oz


THIELE & SMALL PARAMETERS

Vas
23.78 LTR
Xmax
10.5 mm
Fs
64.6 Hz
Qms
2.2
Qes
0.485
Qts
0.392
Re
5.2 ohms


MEASUREMENTS

Overall Diameter
12.12" / 308mm
Front Mount Baffle Cutout
10.9" / 278mm
Mounting Depth
4.96" / 126mm
Overall Depth
5.35" / 136mm
Product Weight
11.5 lbs

Product Overview

DS118 PRO-X12M

12” Mid-Range Loudspeaker 450 Watts 8-Ohms

Experience the power and clarity of the DS18 PRO-X12M, the ultimate mid-range speaker for audiophiles and music lovers everywhere. These speakers pack a serious punch with their strong midrange and crystal-clear high frequencies, delivering a concert-like sound quality without any distortion.
But the real magic of the DS18 PRO-X12M lies in its ability to handle extreme volume levels without sacrificing sound quality. With a high sensitivity of 97.5dB, you can crank up the volume to max and still enjoy crystal-clear audio with every note. And with a frequency response of 63Hz to 5KHz, you'll notice richer and more accurate tones that will take your music to the next level.
Not only do these loudspeakers deliver a top-notch audio experience, but they're built to last. With a maximum power handling of 900W and an RMS power handling of 450W, they're more than capable of handling consistent and heavy usage. And with a mounting depth of just 4.96”, they're easy to install in your car or home audio system.
Upgrade to the DS18 PRO-X12M 12” Mid-Range Loudspeaker today and experience the power and clarity of a true audiophile-grade speaker. Order now and prepare to be blown away by the concert-like audio experience that these speakers provide!

Free shipping on orders $100+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us