Product Overview

Description

Key Features

  • 10" Mid-Range
  • MAX Power: 600 Watts
  • RMS Power: 300 Watts
  • Impedance: 4 or 8-Ohm
  • Ferrite Magnet
  • 96dB

SPECS

SKU
PRO-X10M
Nominal Diameter
10 inch (256 mm)
Nominal Impedance
4 or 8 ohms
Max Power Handing
600 WATTS
RMS Power Handing
300 WATTS
Sensitivity
96 dB
Frequency Response
100 Hz - 5 KHz
Recommended Hi Pass
120 Hz


SPECS

Voice Coil Diameter
50.8 mm (2 inch)
Voice Coil Former Material
Kapton
Winding Material
CCAW
Cone Material

Basket Material
Steel
Magnet Material

Magnet Weight
40 oz


THIELE & SMALL PARAMETERS

Vas
84.93 LTR
Xmax
9.8 mm
Fs
76.3 Hz
Qms
15.28
Qes
0.886
Qts
0.841
Re
5.2 ohms


MEASUREMENTS

Overall Diameter
10" / 256mm
Front Mount Baffle Cutout
9" / 230mm
Mounting Depth
3.77" / 96mm
Overall Depth
4" / 103mm
Product Weight
8 lbs

Product Overview

DS18 PRO-X10M

10” Mid-Range Loudspeaker 300 Watts 8-Ohms

Experience the power and clarity of the DS18 PRO-X10M, the ultimate mid-range speaker for audiophiles and music lovers everywhere. These speakers pack a serious punch with their strong midrange and crystal-clear high frequencies, delivering a concert-like sound quality without any distortion.
But the real magic of the DS18 PRO-X10M lies in its ability to handle extreme volume levels without sacrificing sound quality. With a high sensitivity of 96dB, you can crank up the volume to max and still enjoy crystal-clear audio with every note. And with a frequency response of 70Hz to 5KHz, you'll notice richer and more accurate tones that will take your music to the next level.
Not only do these loudspeakers deliver a top-notch audio experience, but they're built to last. With a maximum power handling of 600W and an RMS power handling of 300W, they're more than capable of handling consistent and heavy usage. And with a mounting depth of just 3.77”, they're easy to install in your car or home audio system.
Upgrade to the DS18 PRO-X10M 10” Mid-Range Loudspeaker today and experience the power and clarity of a true audiophile-grade speaker. Order now and prepare to be blown away by the concert-like audio experience that these speakers provide!

Free shipping on orders $100+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us