Product Overview

Description

Key Features

  • 4 GA OFC Ultra Flex Amplifier Wire Kit
  • Up to 1800 Watts RMS
  • Mini ANL Fuse Holder with 150A
  • Power & Remote Wires
  • Speaker & RCA Cables
  • Installation Accessories ~ RED

Product Overview

DS18 OFCKIT4

4-GA OFC 100% Copper Amplifier Installation Kit

Unleash the full potential of your car audio system with DS18’s OFCKIT4, a wiring masterpiece designed exclusively for audio enthusiasts like you.
OFC is the gold standard in wiring, and for good reason. OFC wiring guarantees unrivaled conductivity, allowing your music to flow seamlessly and effortlessly. OFC is also renowned for its remarkable strength and corrosion resistance, ensuring that your car's audio system lasts a lifetime like your love for music.
DS18’s OFCKIT4 is not just another wiring kit; it's an embodiment of precision engineering and artistry. With 4-GA capacity, this kit can handle amplifiers pumping out up to a staggering 1800W of raw audio power.
DS18 OFCKIT4 includes power, ground, and remote OFC wiring, each meticulously designed to provide you with a flawless audio experience. Inside the box, you'll find a Mini ANL Fuse Holder with a commanding 150 Amp Fuse, a 6-foot 4-GA Loom Tube, a rubber grommet for seamless installation, and a 17-foot red power cable alongside a 3-foot black ground cable – all meticulously engineered to perfection. The 17-foot red/black twisted RCA cable and 17-foot turn-on cable round out these components.

SPECS

SPECS
SKU OFCKIT4
ANL Mini ANL Fuse Holder with Mini ANL-150A
Tube 6 Ft. 4GA Loom Tube
Red Power Cable 17 Ft. Red Power Cable: 21mm OD: 10mm
Black Ground Cable 3 Ft. Black Ground Cable: 21mm OD: 10mm
Twisted RCA Cable 17 Ft. Red/Black Twisted RCA Cable
Turn-On Cable 17 Ft. Turn-On Cable: 20*0.15mm (16-GA)
Speaker Cable 17 Ft. Speaker Cable: 1.31mm* 2 Wires OD: 3.2*6.4mm (16-GA)
MEASUREMENT
Product Weight 5 lbs
Product Dimensions 8.5 x 8.5 x 3
M/C Weight 42 lbs
M/C Dimensions 18 x 13 x 9.25
M/C QTY 8
Sold In Piece

Free shipping on orders $100+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us