Product Overview

Description

The KMC KM730 Hatchet is a flow formed aluminum wheel in a Matte Black finish, offered here in 17 in diameter. Priced per wheel, or as a set of 4.

Key features

  • Construction: Flow Formed Aluminum
  • Finish: Matte Black
  • Diameter: 17 in; width: 8.5 in
  • Lug counts: 5 and 6
  • Load rating: 2,650 lbs per wheel

Specifications

Brand KMC
Style KM730 Hatchet
Finish Matte Black
Construction Flow Formed Aluminum
Diameter 17 in
Width 8.5 in
Bolt patterns 5x127, 6x114.3, 6x120, 6x135, 6x139.7
Lug count 5 and 6
Offset -10 to +25 mm
Centerbore 66.06, 66.9, 71.5, 87.1, 106.1 mm
Load rating 2,650 lbs
Beadlock No
Wheel weight 25.2–27.6 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8.5 5x127 5x5 -10 mm 4.36 in 71.5 mm 2,650 lbs 27.6 lbs KM730MX17855010N 4 × KM730MX17855010N
17x8.5 6x114.3 6x4.5 -10 mm 4.36 in 66.06 mm 2,650 lbs 27.6 lbs KM730MX17856410N 4 × KM730MX17856410N
17x8.5 6x120 – -10 mm 4.36 in 66.9 mm 2,650 lbs 27.6 lbs KM730MX17857710N 4 × KM730MX17857710N
17x8.5 6x139.7 6x5.5 -10 mm 4.36 in 106.1 mm 2,650 lbs 27.3 lbs KM730MX17856810N 4 × KM730MX17856810N
17x8.5 6x135 – +0 mm 4.75 in 87.1 mm 2,650 lbs 27.1 lbs KM730MX17856300 4 × KM730MX17856300
17x8.5 5x127 5x5 +25 mm 5.73 in 71.5 mm 2,650 lbs 25.8 lbs KM730MX17855025 4 × KM730MX17855025
17x8.5 6x114.3 6x4.5 +25 mm 5.73 in 66.06 mm 2,650 lbs 25.8 lbs KM730MX17856425 4 × KM730MX17856425
17x8.5 6x120 – +25 mm 5.73 in 66.9 mm 2,650 lbs 25.8 lbs KM730MX17857725 4 × KM730MX17857725
17x8.5 6x135 – +25 mm 5.73 in 87.1 mm 2,650 lbs 25.8 lbs KM730MX17856325 4 × KM730MX17856325
17x8.5 6x139.7 6x5.5 +25 mm 5.73 in 106.1 mm 2,650 lbs 25.2 lbs KM730MX17856825 4 × KM730MX17856825

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us