Product Overview

Description

The KMC KM545 Trek is a cast aluminum wheel in a Satin Black finish, offered here in 17 in diameter. Priced per wheel, or as a set of 4.

Key features

  • Construction: Cast Aluminum
  • Finish: Satin Black
  • Diameter: 17 in; widths: 8 and 9 in
  • Lug counts: 5 and 6
  • Load rating: 2,500 lbs per wheel

Specifications

Brand KMC
Style KM545 Trek
Finish Satin Black
Construction Cast Aluminum
Diameter 17 in
Width 8 and 9 in
Bolt patterns 5x108, 5x114.3, 5x127, 5x150, 6x114.3, 6x120, 6x135, 6x139.7
Lug count 5 and 6
Offset -12 to +38 mm
Centerbore 66.06, 66.9, 71.5, 72.56, 87.1, 100.3, 106.1, 110.1 mm
Load rating 2,500 lbs
Beadlock No
Wheel weight 26.8–29.7 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8 6x114.3 6x4.5 +20 mm 5.29 in 66.06 mm 2,500 lbs 26.8 lbs KM54578064720 4 × KM54578064720
17x8 6x120 – +20 mm 5.29 in 66.9 mm 2,500 lbs 26.8 lbs KM54578077720 4 × KM54578077720
17x8 6x139.7 6x5.5 +20 mm 5.29 in 106.1 mm 2,500 lbs 26.8 lbs KM54578068720 4 × KM54578068720
17x8 5x114.3 5x4.5 +35 mm 5.88 in 72.56 mm 2,500 lbs 26.8 lbs KM54578012735 4 × KM54578012735
17x8 6x139.7 6x5.5 +35 mm 5.88 in 100.3 mm 2,500 lbs 26.8 lbs KM54578062735 4 × KM54578062735
17x8 5x108 5x4.25 +38 mm 6 in 72.56 mm 2,500 lbs 26.9 lbs KM54578045738 4 × KM54578045738
17x9 5x127 5x5 -12 mm 4.53 in 71.5 mm 2,500 lbs 29.7 lbs KM54579050712N 4 × KM54579050712N
17x9 6x139.7 6x5.5 -12 mm 4.53 in 106.1 mm 2,500 lbs 29.7 lbs KM54579068712N 4 × KM54579068712N
17x9 5x127 5x5 +0 mm 5 in 71.5 mm 2,500 lbs 27.9 lbs KM54579050700 4 × KM54579050700
17x9 6x135 – +0 mm 5 in 87.1 mm 2,500 lbs 27.9 lbs KM54579063700 4 × KM54579063700
17x9 6x139.7 6x5.5 +0 mm 5 in 106.1 mm 2,500 lbs 27.9 lbs KM54579068700 4 × KM54579068700
17x9 5x127 5x5 +18 mm 5.71 in 71.5 mm 2,500 lbs 27.4 lbs KM54579050718 4 × KM54579050718
17x9 5x150 – +18 mm 5.71 in 110.1 mm 2,500 lbs 27.4 lbs KM54579058718 4 × KM54579058718
17x9 6x114.3 6x4.5 +18 mm 5.71 in 66.06 mm 2,500 lbs 27.4 lbs KM54579064718 4 × KM54579064718
17x9 6x135 – +18 mm 5.71 in 87.1 mm 2,500 lbs 27.4 lbs KM54579063718 4 × KM54579063718
17x9 6x139.7 6x5.5 +18 mm 5.71 in 106.1 mm 2,500 lbs 27.4 lbs KM54579068718 4 × KM54579068718

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us