Product Overview

Description

The KMC KM544 Mesa is a cast aluminum wheel in a Candy Red with Black Lip finish, offered here in 17, 18 and 20 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Cast Aluminum
  • Finish: Candy Red with Black Lip
  • Diameters: 17, 18 and 20 in; widths: 8.5 and 9 in
  • Lug counts: 5, 6 and 8
  • Load rating: 2,500–3,640 lbs per wheel, depending on size

Specifications

Brand KMC
Style KM544 Mesa
Finish Candy Red with Black Lip
Construction Cast Aluminum
Diameter 17, 18 and 20 in
Width 8.5 and 9 in
Bolt patterns 5x127, 5x150, 6x114.3, 6x135, 6x139.7, 8x165.1, 8x180
Lug count 5, 6 and 8
Offset -12 to +25 mm
Centerbore 66.06, 71.5, 87.1, 106.1, 110.1, 124.2, 125.1 mm
Load rating 2,500–3,640 lbs
Beadlock No
Wheel weight 29.9–39.5 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8.5 6x139.7 6x5.5 +0 mm 4.75 in 106.1 mm 2,500 lbs 30.3 lbs KM54478568900 4 × KM54478568900
17x9 5x127 5x5 -12 mm 4.53 in 71.5 mm 2,500 lbs 32.4 lbs KM54479050912N 4 × KM54479050912N
17x9 5x150 – -12 mm 4.53 in 110.1 mm 3,640 lbs 31.1 lbs KM54479058912N 4 × KM54479058912N
17x9 6x139.7 6x5.5 +18 mm 5.71 in 106.1 mm 2,500 lbs 29.9 lbs KM54479068918 4 × KM54479068918
18x9 5x127 5x5 +18 mm 5.71 in 71.5 mm 2,500 lbs 34.5 lbs KM54489050918 4 × KM54489050918
18x9 6x114.3 6x4.5 +18 mm 5.71 in 66.06 mm 2,500 lbs 34.4 lbs KM54489064918 4 × KM54489064918
18x9 6x139.7 6x5.5 +18 mm 5.71 in 106.1 mm 2,500 lbs 32.8 lbs KM54489068918 4 × KM54489068918
18x9 8x180 – +18 mm 5.71 in 124.2 mm 3,640 lbs 35.4 lbs KM54489088918 4 × KM54489088918
18x9 5x150 – +25 mm 5.98 in 110.1 mm 3,640 lbs 34.3 lbs KM54489058925A 4 × KM54489058925A
20x9 5x127 5x5 +0 mm 5 in 71.5 mm 2,500 lbs 38.6 lbs KM54429050900 4 × KM54429050900
20x9 6x135 – +0 mm 5 in 87.1 mm 2,500 lbs 37.6 lbs KM54429063900 4 × KM54429063900
20x9 6x139.7 6x5.5 +0 mm 5 in 106.1 mm 2,500 lbs 36.9 lbs KM54429068900 4 × KM54429068900
20x9 8x165.1 8x6.5 +0 mm 5 in 125.1 mm 3,640 lbs 39 lbs KM54429080900 4 × KM54429080900
20x9 6x135 – +18 mm 5.71 in 87.1 mm 2,500 lbs 38.7 lbs KM54429063918 4 × KM54429063918
20x9 5x150 – +25 mm 5.98 in 110.1 mm 2,500 lbs 39.5 lbs KM54429058925 4 × KM54429058925

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us