Product Overview

Description

The KMC KM542 Impact is a cast aluminum wheel in a Satin Black Machined finish, offered here in 16, 17 and 18 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Cast Aluminum
  • Finish: Satin Black Machined
  • Diameters: 16, 17 and 18 in; widths: 7, 8, 8.5 and 9 in
  • Lug counts: 5, 6 and 8
  • Load rating: 1,900–3,640 lbs per wheel, depending on size

Specifications

Brand KMC
Style KM542 Impact
Finish Satin Black Machined
Construction Cast Aluminum
Diameter 16, 17 and 18 in
Width 7, 8, 8.5 and 9 in
Bolt patterns 5x108, 5x110, 5x114.3, 5x127, 5x150, 6x114.3, 6x135, 6x139.7, 8x165.1, 8x180
Lug count 5, 6 and 8
Offset -12 to +38 mm
Centerbore 66.06, 71.5, 72.56, 87.1, 106.1, 110.1, 124.2, 125.1 mm
Load rating 1,900–3,640 lbs
Beadlock No
Wheel weight 22–31.7 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
16x7 5x110 – +30 mm 5.18 in 72.56 mm 1,900 lbs 22 lbs KM54267042530 4 × KM54267042530
16x7 5x114.3 5x4.5 +30 mm 5.18 in 72.56 mm 1,900 lbs 22 lbs KM54267012530 4 × KM54267012530
16x8 5x150 – +0 mm 4.5 in 110.1 mm 2,500 lbs 26.1 lbs KM54268058500 4 × KM54268058500
16x8 6x139.7 6x5.5 +0 mm 4.5 in 106.1 mm 2,500 lbs 24.4 lbs KM54268068500 4 × KM54268068500
17x8 6x139.7 6x5.5 +20 mm 5.29 in 106.1 mm 2,500 lbs 27 lbs KM54278068520 4 × KM54278068520
17x8 5x114.3 5x4.5 +35 mm 5.88 in 72.56 mm 2,500 lbs 27 lbs KM54278012535 4 × KM54278012535
17x8 5x108 5x4.25 +38 mm 6 in 72.56 mm 2,500 lbs 28.9 lbs KM54278045538 4 × KM54278045538
17x8.5 6x135 – +0 mm 4.75 in 87.1 mm 2,500 lbs 28.8 lbs KM54278563500 4 × KM54278563500
17x8.5 6x139.7 6x5.5 +0 mm 4.75 in 106.1 mm 2,500 lbs 28 lbs KM54278568500 4 × KM54278568500
17x8.5 8x165.1 8x6.5 +0 mm 4.75 in 125.1 mm 3,640 lbs 31.4 lbs KM54278580500 4 × KM54278580500
17x8.5 8x180 – +0 mm 4.75 in 124.2 mm 3,640 lbs 31.7 lbs KM54278588500 4 × KM54278588500
17x9 5x127 5x5 -12 mm 4.53 in 71.5 mm 2,500 lbs 29.7 lbs KM54279050512N 4 × KM54279050512N
17x9 6x139.7 6x5.5 -12 mm 4.53 in 106.1 mm 2,500 lbs 28.4 lbs KM54279068512N 4 × KM54279068512N
17x9 5x127 5x5 +18 mm 5.71 in 71.5 mm 2,500 lbs 30.1 lbs KM54279050518 4 × KM54279050518
17x9 6x114.3 6x4.5 +18 mm 5.71 in 66.06 mm 2,500 lbs 29.1 lbs KM54279064518 4 × KM54279064518
17x9 6x135 – +18 mm 5.71 in 87.1 mm 2,500 lbs 29.2 lbs KM54279063518 4 × KM54279063518
17x9 6x139.7 6x5.5 +18 mm 5.71 in 106.1 mm 2,500 lbs 28.4 lbs KM54279068518 4 × KM54279068518
18x9 6x139.7 6x5.5 +0 mm 5 in 106.1 mm 2,500 lbs 28.5 lbs KM54289068500 4 × KM54289068500
18x9 5x127 5x5 +18 mm 5.71 in 71.5 mm 2,500 lbs 31.6 lbs KM54289050518 4 × KM54289050518
18x9 6x114.3 6x4.5 +18 mm 5.71 in 66.06 mm 2,500 lbs 31.5 lbs KM54289064518 4 × KM54289064518
18x9 6x139.7 6x5.5 +18 mm 5.71 in 106.1 mm 2,500 lbs 29.9 lbs KM54289068518 4 × KM54289068518

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us