Product Overview

Description

The KMC KM541 Dirty Harry is a cast aluminum wheel in a Satin Gray with Black Lip finish, offered here in 17, 18 and 20 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Cast Aluminum
  • Finish: Satin Gray with Black Lip
  • Diameters: 17, 18 and 20 in; widths: 8.5 and 9 in
  • Lug counts: 5, 6 and 8
  • Load rating: 2,500–3,640 lbs per wheel, depending on size

Specifications

Brand KMC
Style KM541 Dirty Harry
Finish Satin Gray with Black Lip
Construction Cast Aluminum
Diameter 17, 18 and 20 in
Width 8.5 and 9 in
Bolt patterns 5x127, 6x114.3, 6x135, 6x139.7, 8x165.1, 8x170
Lug count 5, 6 and 8
Offset -12 to +18 mm
Centerbore 66.06, 71.5, 87.1, 106.1, 125.1 mm
Load rating 2,500–3,640 lbs
Beadlock No
Wheel weight 27.4–35.2 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8.5 6x135 – +0 mm 4.75 in 87.1 mm 2,500 lbs 28.2 lbs KM54178563900 4 × KM54178563900
17x8.5 6x139.7 6x5.5 +0 mm 4.75 in 106.1 mm 2,500 lbs 27.4 lbs KM54178568900 4 × KM54178568900
17x8.5 8x165.1 8x6.5 +0 mm 4.75 in 125.1 mm 3,640 lbs 30.1 lbs KM54178580900 4 × KM54178580900
17x8.5 8x170 – +0 mm 4.75 in 125.1 mm 3,640 lbs 30.1 lbs KM54178587900 4 × KM54178587900
17x8.5 5x127 5x5 +18 mm 5.46 in 71.5 mm 2,500 lbs 31.1 lbs KM54178550918 4 × KM54178550918
17x8.5 6x114.3 6x4.5 +18 mm 5.46 in 66.06 mm 2,500 lbs 30 lbs KM54178564918 4 × KM54178564918
17x8.5 6x139.7 6x5.5 +18 mm 5.46 in 106.1 mm 2,500 lbs 29.3 lbs KM54178568918 4 × KM54178568918
17x9 5x127 5x5 -12 mm 4.53 in 71.5 mm 2,500 lbs 29 lbs KM54179050912N 4 × KM54179050912N
17x9 6x139.7 6x5.5 -12 mm 4.53 in 106.1 mm 2,500 lbs 27.9 lbs KM54179068912N 4 × KM54179068912N
18x8.5 6x139.7 6x5.5 +0 mm 4.75 in 106.1 mm 2,500 lbs 29.6 lbs KM54188568900 4 × KM54188568900
20x9 5x127 5x5 +0 mm 5 in 71.5 mm 2,500 lbs – KM54129050900 4 × KM54129050900
20x9 6x135 – +0 mm 5 in 87.1 mm 2,500 lbs 35.2 lbs KM54129063900 4 × KM54129063900
20x9 6x139.7 6x5.5 +0 mm 5 in 106.1 mm 2,500 lbs 34.5 lbs KM54129068900 4 × KM54129068900

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us