Product Overview

Description

The KMC KM444 Mesa Forged Beadlock is a wheel in a Raw Machined finish, offered here in 17 in diameter. Priced per wheel, or as a set of 4.

Key features

  • Construction: Monoblock Forged
  • Finish: Raw Machined
  • Beadlock wheel
  • Diameter: 17 in; width: 9 in
  • Lug counts: 5, 6 and 8
  • Load rating: 2,500–3,700 lbs per wheel, depending on size

Specifications

Brand KMC
Style KM444 Mesa Forged Beadlock
Finish Raw Machined
Construction Monoblock Forged
Diameter 17 in
Width 9 in
Bolt patterns 5x139.7, 5x150, 6x135, 6x139.7, 6x165.1, 8x165.1, 8x180
Lug count 5, 6 and 8
Offset -12 to +25 mm
Centerbore 72.56, 87.1, 108, 110.3, 125.1 mm
Load rating 2,500–3,700 lbs
Beadlock Yes
Use Off-road use only (manufacturer's statement)
Wheel weight 26.2–38.6 lbs
Set of 4 Four wheels

Note from KMC: beadlock wheels are sold for off-road use only. Off-road-use-only wheels are illegal on public roads in many states and provinces, as they are intended only for racing and/or off-road vehicles.

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x9 5x139.7 5x5.5 -12 mm 4.53 in 108 mm 2,500 lbs 26.8 lbs KM44479085512N 4 × KM44479085512N
17x9 6x135 – -12 mm 4.53 in 87.1 mm 2,500 lbs 27.4 lbs KM44479063512N 4 × KM44479063512N
17x9 6x139.7 6x5.5 -12 mm 4.53 in 108 mm 2,500 lbs 26.4 lbs KM44479060512N 4 × KM44479060512N
17x9 6x165.1 6x6.5 -12 mm 4.53 in 108 mm 3,700 lbs 30.1 lbs KM44479091512N 4 × KM44479091512N
17x9 8x165.1 8x6.5 -12 mm 4.53 in 125.1 mm 3,700 lbs 29.7 lbs KM44479080512N 4 × KM44479080512N
17x9 8x180 – -12 mm 4.53 in 72.56 mm 2,500 lbs 38.6 lbs KM44479088512N 4 × KM44479088512N
17x9 5x139.7 5x5.5 +0 mm 5 in 108 mm 2,500 lbs 26.4 lbs KM44479085500 4 × KM44479085500
17x9 6x135 – +0 mm 5 in 87.1 mm 2,500 lbs 27 lbs KM44479063500 4 × KM44479063500
17x9 6x139.7 6x5.5 +0 mm 5 in 108 mm 2,500 lbs 26.2 lbs KM44479060500 4 × KM44479060500
17x9 6x165.1 6x6.5 +0 mm 5 in 108 mm 3,700 lbs 29 lbs KM44479091500 4 × KM44479091500
17x9 5x139.7 5x5.5 +25 mm 5.98 in 108 mm 2,500 lbs 26.4 lbs KM44479085525 4 × KM44479085525
17x9 5x150 – +25 mm 5.98 in 110.3 mm 2,500 lbs 26.4 lbs KM44479058525 4 × KM44479058525
17x9 6x135 – +25 mm 5.98 in 87.1 mm 2,500 lbs 28.2 lbs KM44479063525 4 × KM44479063525
17x9 6x165.1 6x6.5 +25 mm 5.98 in 108 mm 3,700 lbs 29.3 lbs KM44479091525 4 × KM44479091525

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us