Product Overview

Description

The KMC KM234 Grenade Desert Beadlock is a cast aluminum wheel in a Machined finish, offered here in 17 and 20 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Cast Aluminum
  • Finish: Machined
  • Beadlock wheel
  • Diameters: 17 and 20 in; widths: 8.5 and 9 in
  • Lug counts: 5, 6 and 8
  • Load rating: 2,500–3,700 lbs per wheel, depending on size

Specifications

Brand KMC
Style KM234 Grenade Desert Beadlock
Finish Machined
Construction Cast Aluminum
Diameter 17 and 20 in
Width 8.5 and 9 in
Bolt patterns 5x127, 5x139.7, 6x135, 6x139.7, 6x165.1, 8x165.1
Lug count 5, 6 and 8
Offset -12 to +0 mm
Centerbore 71.5, 87.1, 108, 125.1 mm
Load rating 2,500–3,700 lbs
Beadlock Yes
Use Off-road use only (manufacturer's statement)
Wheel weight 27–44.7 lbs
Set of 4 Four wheels

Note from KMC: beadlock wheels are sold for off-road use only. Off-road-use-only wheels are illegal on public roads in many states and provinces, as they are intended only for racing and/or off-road vehicles.

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8.5 5x139.7 5x5.5 +0 mm 4.75 in Not stated by supplier Not stated by supplier 27 lbs KM2347855500 4 × KM2347855500
17x8.5 6x135 – +0 mm 4.75 in 87.1 mm 2,500 lbs 34.3 lbs KM23478563500 4 × KM23478563500
17x8.5 6x139.7 6x5.5 +0 mm 4.75 in 108 mm 2,500 lbs 34.3 lbs KM23478560500 4 × KM23478560500
17x8.5 6x165.1 6x6.5 +0 mm 4.75 in 108 mm 2,500 lbs 34.3 lbs KM23478591500 4 × KM23478591500
17x8.5 8x165.1 8x6.5 +0 mm 4.75 in 125.1 mm 3,640 lbs 33 lbs KM23478580500 4 × KM23478580500
20x9 5x127 5x5 -12 mm 4.53 in 71.5 mm 2,500 lbs 44.7 lbs KM23429050512N 4 × KM23429050512N
20x9 6x139.7 6x5.5 -12 mm 4.53 in 108 mm 2,500 lbs 42.9 lbs KM23429060512N 4 × KM23429060512N
20x9 8x165.1 8x6.5 -12 mm 4.53 in 125.1 mm 3,700 lbs 43.1 lbs KM23429080512N 4 × KM23429080512N

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us