Product Overview

Description

If you drive a 08–16 Ford F-350 Crew Cab, this Ground Shaker dual 12" sealed enclosure was shaped for it: it sits behind the rear seat and fires forward. A sealed design keeps the bass controlled and musical, and it puts two 12" subs where the factory left dead space. Each woofer gets its own chamber, which keeps them from fighting each other.

Key Features

  • Vehicle-specific enclosure for the 08–16 Ford F-350 Crew Cab — mounts behind the rear seat, forward-firing
  • Dual sealed chambers: 0.70 ft³ per subwoofer, 1.40 ft³ total air volume
  • Cutouts sized for TW3 subwoofers only
  • Built from ⅝" high-quality MDF, carpeted with durable trunk-liner finish
  • Sealed with high-quality Titebond silicone and glued with Titebond wood glue
  • 2 binding post terminals
  • Installation requires removal of the jack kit; power window motor must be removed during installation

Specifications

SKU GS-RF350TW3212B
Application 08–16 Ford F-350 Crew Cab — behind rear seat
Woofer Size Dual 12"
Cutout Diameter 11⅝"
Air Volume 1.40 ft³ total; 0.70 ft³ per subwoofer
Chambers 2 individual chambers
Subwoofer Compatibility TW3 subwoofers only
Mounting Depth 5"
Enclosure Type Sealed
Firing Direction Forward
Height 16⅝"
Length 58"
Top Depth 3"
Bottom Depth 6½"
Construction ⅝" high-quality MDF, carpeted trunk-liner finish, Titebond silicone seal, Titebond wood glue
Terminals 2 binding post terminals
Weight 48 lbs
Color Black

Subwoofers not included. Price is each.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us