Product Overview

Description

Here is Ground Shaker's dual 8" ported enclosure for the 08–16 Ford F-350 Crew Cab; it sits behind the rear seat and fires forward. The slot port tuned to 32 Hz gives two 8" subs noticeably more low-end punch than a sealed box of the same footprint with 1.35 cubic feet of air volume.

Key Features

  • Vehicle-specific design for the 2008–2016 Ford F-350 Crew Cab — fits behind the rear seat
  • Dual 8" ported enclosure with 1.35 ft³ of air volume, tuned to 32 Hz
  • Slot port (9½" W × 12" L) for deeper, louder low-end output
  • Forward-firing woofer placement aims the bass into the cab
  • Built from ⅝" high-quality MDF and carpeted with a durable trunk-liner finish
  • Sealed with high-quality Titebond silicone and glued with Titebond wood glue; 2 binding post terminals
  • Install notes: removal of the jack kit is required, and the power window motor must be removed during installation

Specifications

SKU GS-RF350P28B
Application 08–16 Ford F-350 Crew Cab
Woofer Size Dual 8"
Cutout Diameter 7⅛"
Air Volume 1.35 ft³
Tuning Frequency 32 Hz
Port 1 slot port (W 9½" × L 12")
Mounting Depth 5"
Enclosure Type Ported
Firing Direction Forward
Height 16⅝"
Length 58"
Top Depth 3"
Bottom Depth 6½"
Construction ⅝" high-quality MDF, carpeted with durable trunk-liner finish
Terminals 2 binding post terminals
Weight 48 lbs
Color Black

Subwoofer option

Add two DS18 SRW8.4 shallow-mount 8" subwoofers — 150W RMS / 300W MAX, SVC 4-ohm, 2.95" mounting depth, 7.12" front-mount cutout per DS18's dimension drawing — and they ship with the box, one per woofer opening. This box is cut 7⅛" with 5" of mounting depth, so the SRW8.4 fits as shipped. Choose "Box only" to buy the enclosure alone.

Box-only option: subwoofers not included. Price is each.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us