Product Overview

Description

If you drive a 19–26 Dodge Ram 1500 Quad Cab, this Ground Shaker dual 8" sealed enclosure was shaped for it: it sits under the rear seat and fires upward. Sealed boxes like this favor tight, accurate bass over sheer volume. It is sold as the box only; if you want it ready to wire, choose the matching DS18 subwoofers from the option menu.

Key Features

  • Vehicle-specific enclosure for the 19–26 Dodge Ram Quad Cab
  • Dual 8″ sealed design — 1.04 ft³ air volume
  • Mounting depth 5″
  • 2 individual chambers
  • 5/8″ high quality MDF wood
  • Carpeted with durable trunk liner finish
  • Sealed with high quality Titebond silicone
  • Glued with high quality Titebond wood glue
  • 2 spring loaded terminals
  • Up firing
  • Fits under rear seat

Specifications

SKU GS-QDG28B
Application 19–26 Dodge Ram Quad Cab
Enclosure Type Sealed
Woofer Size Dual 8″
Cutout Diameter 7 1/8″
Air Volume 1.04 ft³
Volume Per Subwoofer 0.52 ft³
Weight 27 lbs
Mounting Depth 5″
Height 7 1/4″
Length 52″
Top Depth 13″
Bottom Depth 8 1/4″

Subwoofer option

Add four DS18 SRW8.4 shallow-mount 8" subwoofers — 150W RMS / 300W MAX, SVC 4-ohm, 2.95" mounting depth, 7.12" front-mount cutout per DS18's dimension drawing — and they ship with the box, one per woofer opening. This box is cut 7 1/8″ with 5″ of mounting depth, so the SRW8.4 fits as shipped. Choose "Box only" to buy the enclosure alone.

Box-only option: subwoofers not included. Price is each.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us