Product Overview

Description

This Ground Shaker dual 8" sealed enclosure is cut for the 09–26 Ford F-150 Crew Cab; it sits under the rear seat and fires down. A sealed design keeps the bass controlled and musical, and it tucks two 8" subs under the seat without giving up the cab. Subwoofers are not included, so bring your own or match it with one from the DS18 lineup.

Key Features

  • Vehicle-specific dual sealed enclosure for the 2009–2026 Ford F-150 Crew Cab — fits under the rear seat
  • Square Solo-Baric-style cutouts for two 8" square subwoofers
  • Down-firing design with 1.32 ft³ of sealed air volume
  • Built from ⅝" high-quality MDF and carpeted with a durable trunk-liner finish
  • Sealed with Titebond silicone and glued with Titebond wood glue for an airtight cabinet
  • 2 binding-post terminals for clean, secure wiring

Specifications

SKU GS-DF150KK28B
Application 2009–2026 Ford F-150 Crew Cab
Woofer Size Dual 8" square Solo-Baric-style
Cutout Diameter 7⅜"
Air Volume 1.32 ft³
Mounting Depth 5¼"
Enclosure Type Sealed
Firing Direction Down-firing
Front Height 7¼"
Rear Height 5¼"
Length 55"
Top Depth 13¾"
Bottom Depth 11"
Construction ⅝" high-quality MDF, carpeted trunk-liner finish, Titebond silicone seal and wood glue
Terminals 2 binding-post terminals
Weight 34 lbs
Color Black

"Solo-Baric®" refers to Kicker's square-woofer form factor; this is a Ground Shaker enclosure, not a Kicker® product.

Subwoofers not included. Price is each.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us