Product Overview

Description

Key Features

  • Universal dual 15" ported competition enclosure tuned to 30 Hz
  • 6.20 CUBIC FT. net air volume
  • Slot port: H-15 1/2" W-4 3/4" L-28 1/2"
  • 13 7/8" cutout, 13" mounting depth
  • 3/4" MDF construction, carpeted in trunk-liner finish
  • Sealed with Titebond silicone and glued with Titebond wood glue
  • 2 speaker terminal cups

Specifications

SKU GS-30HZ215B
Application Universal (check dimensions for fitment)
Woofer Size 15" × two
Enclosure Type Ported, slot port
Tuning Frequency 30 Hz
Cutout Diameter 13 7/8"
Air Volume 6.20 CUBIC FT.
Mounting Depth 13"
Weight 102 LBS.
Port 1 slot port, H-15 1/2" W-4 3/4" L-28 1/2"
Front Baffle 1"
Height 17"
Length 44"
Depth 22"
Construction 3/4" MDF, carpeted trunk-liner finish, Titebond silicone seal and wood glue
Terminals 2 Speaker Terminal Cups
Color Black

Box will not fit all vehicles check dimensions for fitment.

Subwoofers not included. Price is each.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us