EVO Heavy Duty Gas/392 4.5" Lift High Clearance Long Arm

Product Overview

Description

EVO MFG 4.5" Lift High Clearance Long Arm Suspension System for the Jeep Wrangler JLU 4-Door 2018–2025, Heavy Duty Gas/392. Offered in 30 configurations: choose Links, Shocks and Track Bars above.

The front arms mount tucked up inside nearly flush with the bottom of the frame mounting inches above the stock front lower mounting bracket. The rear mounting locations for the long arm are on the side of the frame, above the bottom giving inches of clearance over the factory locations as well. Keeping optimal geometry while maintaining as much clearance was critical in the design of this system. The mounting brackets align to the frame simply using existing factory holes giving complete assurance of proper locating during install. EVO MFG Long Arm joints feature Johnny Joints on both ends of the control arms for restriction free articulation and motion with no wearable and limited bond rubber.

All EVO MFG lower long arms are built with strength in mind. Included in these kits are front brake line extension brackets, rear sway bar end links and bump stop extensions. Factory shocks can be retained while maintaining wheel travel by using shock extensions (not included with this kit); without shock extensions, the kit allows your choice of aftermarket lift shocks. The King 2.5" Shocks option comes with EVO SPEC King 2.5" Remote Reservoir shocks at all 4 corners.

Configurations

Plus ("P"): Front and rear adjustable track bars are included with PLUS "P" kits.

Key features

Lower control arm choice: DOM steel tube or billet aluminum ENVY Links
DOM Tube option: 2.0 x 0.25 wall DOM steel tube links powder coated black
ENVY Links option: billet aluminum with replaceable steel skid plates, raw aluminum or gold anodized

Fitment

Fits	Jeep Wrangler JL 4-door (JLU), 2018–2025
Engine	Gas/392.
Model years	EVO does not list model-year limits for this part. Confirm fitment before ordering.
Lift note	4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model.
Lift note	Lift increases will vary.
Lift note	392 models, due to their taller starting point, may see less net lift increase than stated.
Required	These kits require wheel spacers or aftermarket wheels with smaller backspacing.
Required	4.5" Lift Kit will require front and rear adjustable track bars.
Installation	The mounting brackets are designed to require no exhaust cutting on 3.6L Jeep Wrangler JLUs (minor grind/clearance to flange required) and weld to the frame.
Installation	Simply bolt brackets up to frame with existing hardware and weld them in place.
Installation	Cutting, grinding and welding of frame brackets required.
Installation	Depending on actual tire sizes, some minor factory inner liner plastic may need to be trimmed/removed to fully clear some tires under compression.
Note	The EVO MFG 4.5" High Clearance Long Arm kits require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure).

Confirm your exact model year, body style, trim and engine before ordering.

Specifications

Brand	EVO MFG
Product type	Suspension System
Lift height	4.5"
Part numbers	30 configurations, each with its own EVO part number (shown with the selected option)
California Prop 65	WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.