EVO MFG Jeep Gladiator JT 2020+ Gas 6.5" Lift Long Arm Suspension System

Product Overview

Description

EVO MFG 6.5" Lift Long Arm Suspension System for the Jeep Gladiator JT 2020+, Gas. Offered in 24 configurations: choose Springs and Links, Shocks and Track Bars above.

The EVO MFG 6.5" Jeep Gladiator JT Long Arm Suspension Systems are designed and engineered to lift and level the 2020+ Jeep Gladiator JT 6.5", while maintaining a performance spring rate and smooth ride quality, and retaining tow capacities. These kits come with a set of 6.5" lift springs specific to each corner which will keep the Jeep Gladiator JT level side to side. These kits allow for use of your choice of any aftermarket 6" lift shock or use of EVO's SPEC tuned 2.5" Remote Reservoir King Shocks. The front arms mount tucked up inside nearly flush with the bottom of the frame mounting inches above the stock front lower mounting bracket.

The rear mounting locations for the long arm are on the side of the frame, half above the bottom giving ideal clearance and geometry. Keeping optimal geometry while maintaining as much clearance was critical in the design of this system. This allows for good ground clearance but just as importantly retaining flat and optimal control arm angles giving ideal ground clearance, smooth ride quality and long travel ability. The mounting brackets align to the frame simply using existing factory holes giving complete assurance of proper locating during install.

Configurations

Plus ("P") and "K" kits: front and rear adjustable track bars to fine tune axle center are included with PLUS "P" kits; "K" kits include a set of 4 EVO SPEC Remote Reservoir King Shocks.

Key features

4 link front and rear suspension system
Lower control arm choice: DOM steel tube or billet aluminum ENVY Links
DOM Tube option: 2.0 x 0.25 wall DOM steel tube links powder coated black
ENVY Links option: billet aluminum with replaceable steel skid plates, raw aluminum or gold anodized

Fitment

Fits	Jeep Gladiator JT, 2020+
Engine	Gas
Fits	All trims: Sport, Overland, Rubicon, Mojave.
Compatible	Optioned 2.5" EVO SPEC Remote Reservoir King Shocks (both Standard and Adjustable) are Gladiator Mojave Compatible.
Not recommended	6.5" lift not recommended on non-FAD Gladiators.
Required	Wheel spacers or aftermarket wheels with smaller backspacing and aftermarket front driveshaft are required for installation.
Required	Front and rear adjustable track bars are required for proper alignment and installation on 6.5" JT lifts (included only when the Front / Rear Track Bars option is selected).
Required	6.5" Gladiator kits require an aftermarket front driveshaft.
Installation	The mounting brackets are designed to require no exhaust cutting on 3.6L and Diesel Jeep Gladiators and weld to the frame.
Installation	Simply bolt brackets up to frame with existing hardware and weld them in place.
Installation	No significant multiple holes in frame to be drilled.
Installation	Cutting and grinding of frame brackets required.
Installation	Welding required.
Note	Exhaust modifications are not required.
Recommended	EVO-3027B JL/JT Protek Front Shock Relocation Brackets (sold separately) are recommended with 2.5" King shocks or with all larger aftermarket shock options.
Recommended	A rear aftermarket driveshaft (sold separately) is recommended. One of many manufacturers is JE Reel. Check with the manufacturer for compatibility.
Optional (sold separately)	EVO-3097V Front Inner Fenders.
Optional (sold separately)	EVO-600081KB Front Air Bumps.

Confirm your exact model year, body style, trim and engine before ordering.

Specifications

Brand	EVO MFG
Product type	Suspension System
Part numbers	24 configurations, each with its own EVO part number (shown with the selected option)
Installation time (EVO)	20-30 hours