EVO MFG Jeep Gladiator JT 2020+ Gas 2.5" Lift Enforcer Suspension System

Product Overview

Description

EVO MFG 2.5" Lift Enforcer Suspension System for the Jeep Gladiator JT 2020+, Gas. Offered in 80 configurations: choose Stage, Shocks and Track Bars above.

The JT Enforcer kits are specifically designed and engineered to lift your JT and maintain a performance spring rate, smooth ride quality all while retaining tow capacities. These kits allow for use of your choice of any aftermarket 2.5-5" lift shock or use of EVO's SPEC tuned 2.5" Remote Reservoir King Shocks. These kits come with a set of 2.5" lift springs specific to each corner which will keep the Jeep Gladiator JT level side to side. When a vehicle is lifted, the control arms sit at a steeper angle at ride height, which can cause some chop in ride quality; on Overland stages, the included Overland Control Arm Brackets relocate the front control arm frame mounts to keep flatter, factory-like control arm angles and reduce that chop.

Both the standard and Overland kits drive well; the Overland kits are better suited for light off-road and on-road use than for hard off-road crawling. The EVO MFG 2.5" JT Enforcer Kits are easy to install using normal tools. Installation is a simple bolt-on. All included Enforcer Arms use only rebuildable free articulating spherical bearings on all ends of each arm giving restriction free travel and articulation.

Configurations

Overland: The difference with EVO MFG Enforcer Overland systems vs EVO MFG Enforcer systems is the use of front Overland Control Arm Brackets.
Stage 1 kits include all the necessary parts to lift your JT 2.5".
Stage 2 kits include Stage 1 components as well as EVO MFG Enforcer Front Lower Adjustable Control Arms to allow for caster adjustments.
Stage 3 kits include Stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.
Stage 4 kits include Stage 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.
Plus ("P"): Front and rear adjustable track bars to fine tune axle center are included with PLUS "P" kits.
K kits: "K" Kits include a set of 4 EVO SPEC King Shocks.
KA kits: "KA" Kits include 4 EVO SPEC King Shocks with compression adjusters.

Fitment

Fits	Jeep Gladiator JT, 2020+
Engine	Gas
Fits	All trims: Sport, Overland, Rubicon, Mojave.
Compatible	Stock Front and Rear Driveshafts compatible when paired with Packaged Shocks.
Compatible	Optioned 2.5" EVO SPEC Remote Reservoir King Shocks (both Standard and Adjustable) are Gladiator Mojave Compatible.
Compatible	2.0" and 2.5" King shocks are Mojave compatible.
Not compatible	Bilstein shocks are not compatible with the Gladiator Mojave.
Required	These kits require wheel spacers or aftermarket wheels with smaller backspacing.
Installation	No drilling or cutting.
Note	These kits require no driveshaft or exhaust modifications.
Recommended	Stage 1 Overland or Stage 2 is the recommended minimum kit for all currently unmodified/stock suspension Gladiators.
Optional (sold separately)	Factory shocks can be reused with the addition of EVO MFG shock extension kits EVO-3004B and EVO-3083B (sold separately).
Optional (sold separately)	EVO-3097V Front Inner Fenders.
Optional (sold separately)	EVO-600081KB Front Air Bumps.

Confirm your exact model year, body style, trim and engine before ordering.

Specifications

Brand	EVO MFG
Product type	Suspension System
Part numbers	80 configurations, each with its own EVO part number (shown with the selected option)
Shipping weight	80 lb
California Prop 65	WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.