DS18 SLG-UDSD6LD-20UP Polaris Slingshot Under Dash Enclosure with Dual ZR6.4D Subwoofers | 2020 - Current
Free shipping on orders over $100
Continental US · processed within 1–2 business days
Store-credit returns
New, uninstalled items in original packaging
In stock! Ships within 2 business days.
Award Winning Sound
2-Year Limited Warranty
Variety of Payment Options
DS18 SLG-UDSD6LD-20UP Polaris Slingshot Under Dash Enclosure with Dual ZR6.4D Subwoofers | 2020 - Current
Product Overview
Description
Key Features
- Fits 2020 - Current
- Vehicle-specific for the Polaris Slingshot
Product Overview
There’s no better way to pack some punchy BASS in your 2020+ Polaris Slingshot’s sound system than DS18’s easy-to-install SLG-UDSD6LD-20UP!
The SLG-UDSD6LD-20UP houses two of our best-selling ZR6.4D subwoofers, featuring a 1.5-inch voice coil that handles 300W RMS and 600W MAX power. The large foam surround and pressed paper cone work harmoniously to deliver smooth, crisp bass that can be heard all throughout your Slingshot. These subwoofers deliver clean, distortion-free bass that will make you feel every beat in your bones. The SLG-UDSD6LD-20UP is sealed with an internal volume of 0.3 ft³ and comes equipped with damping material to push the ZR6.4Ds past their limits.
To overcome the challenge of the Slingshot’s open-air design, we engineered the SLG-UDSD6LD-20UP with UV-resistant and waterproof durable mold-injected plastic, making it extremely resistant to harsh elements. Coated metal brackets were meticulously integrated into the design, providing unrivaled resistance against the elements.
The SLG-UDSD6LD-20UP is designed for effortless installation, so you can spend less time setting up and more time getting LOUD! With all necessary hardware included, your 2020+ Slingshot will be just as loud as the pros in no time.
Perfectly fitted for 2020+ Polaris Slingshot models, the SLG-UDSD6LD-20UP, when combined with all enclosures in our SLG series, reinforces an impenetrable soundstage designed to cut through the noise of the open road!
Specifications
| SKU | SLG-UDSD6LD-20UP |
| Application | Polaris Slingshot |
| Sold As | Each |
Free shipping on orders $100+
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
FAQs
Please read our FAQs page to find out more.
RMS vs. MAX power — which number do I actually care about?
RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.
What does the IP65 rating on DS18 marine gear actually mean?
It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.
How do I match an amplifier to my speakers without guessing?
Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.
Can I mix marine-grade gear into a standard car audio setup, or the reverse?
You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.
What gauge wiring kit do I need?
It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.