Product Overview

Description

The DS18 PRO-SM8 is a slim 8" mid-range loudspeaker rated 250W RMS and 500W MAX, available in 2 ohm (PRO-SM8.2) or 4 ohm (PRO-SM8.4). It is built for motorcycles and other tight installs where the sound has to carry over wind and engine noise, with a water-resistant paper cone and 97dB sensitivity. Mounting depth is 2.5" with a 7" cutout; sold as a single.

Key Features

  • 8" shallow mid-range loudspeaker, 250W RMS / 500W MAX
  • Choose 2-Ohm (PRO-SM8.2) or 4-Ohm (PRO-SM8.4)
  • Water-resistant cone, dust cap and cloth surround
  • 97dB sensitivity (1W/1m)
  • 1.5" Kapton voice coil with 25 oz ferrite magnet
  • 2.5" mounting depth, 7" front-mount cutout
  • Sold as: single (each)

Product Overview

The PRO-SM8 is DS18's slim 8" mid-range for motorcycles, powersports and other shallow locations. Both versions handle 250W RMS and 500W MAX, cover 65Hz to 12kHz and reach 97dB sensitivity, so vocals and mid-range stay clear at highway speed. The water-resistant paper cone and dust cap and the coated cloth surround suit exposed installs, and the steel basket needs only 2.5" of mounting depth. DS18 publishes no water-resistance rating for these speakers. Pick the 2-ohm PRO-SM8.2 or the 4-ohm PRO-SM8.4 to match your amplifier's load. Sold as: single (each).

SPECS: PRO-SM8.2 (2 Ohm)

SKU PRO-SM8.2
Nominal Diameter 8" / 203.2mm
Nominal Impedance 2 OHMS
RMS Power Handing 250 Watts
Maximum Power Handing 500 Watts
Sensitivity (1w/1m) 97 dB
Frequency Response 65Hz-12KHz
Recommended Hi Pass Crossover 160 Hz
Voice Coil Diameter 1.5" / 38.1 mm
Voice Coil Former Material Kapton
Winding Material CCAW
Basket Material Steel
Magnet Weight 25 Oz
Vas 25.91L / 0.915ft3
Xmax 8 mm
Fs 100 Hz
Qms 8.051
Qes 1.013
Qts 0.9
Re 2 OHMS
Overall Diameter 8.23" / 209mm
Front Mount Baffle Cutout 7" / 180 mm
Mounting Depth 2.5" / 63 mm
Overall Depth 2.7" / 69 mm
Product Weight 5 lbs
Product Dimensions 9.0 x 9.0 x 3
M/C Weight 39 lbs
M/C Dimensions 18.5 x 18.5 x 7
M/C QTY 8
Sold In Piece

SPECS: PRO-SM8.4 (4 Ohm)

SKU PRO-SM8.4
Nominal Diameter 8" / 203.2mm
Nominal Impedance 4-Ohm
RMS Power Handling 250W
MAX Power Handling 500W
Sensitivity (1w/1m) 97dB
Frequency Response 65Hz - 12KHz
Recommended HI Pass Crossover 160 Hz
Pair or Single Single
Grill Included No
Voice Coil Water Protection No
Water-Resistant Rating N/A
Voice Coil Diameter 1.5" / 38.1mm
Voice Coil Former Material Kapton
Winding Material CCAW
Cone Material Water Resistant Paper
Surround Material Coated Cloth
Basket Material Steel
Basket Color/Finish Gloss Red
Magnet Material Ferrite
Magnet Weight 25 Oz
Equivalent Volume 24.96L / 0.881f3
Excursion (one way) 1.3 mm
Free Air Resonance 110Hz
Mechanical Factor (Qms) 8.062
Electrical Factor (Qes) 1.024
Total Factor (Qts) 0.898
Mechanical Mass 10.132g
Mechanical Compliance 0.416mm/N
BL Factor 3.027
Voice Coil Inductance 0.364mH
Cone Area 213.82cm2
DC Resistance 3.2 ohms
Mechanical Mass w/o Air 9.98g
Overall Diameter 8.23" / 209mm
Overall Depth 2.7" / 69mm
Front Mount Baffle Cutout 7" / 180mm
Mounting Depth 2.5" / 63mm
Motor Diameter 4.72" / 120mm

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us