Product Overview

Description

Key Features

  • 6x9" 2-Way Coaxial
  • MAX Power: 560 Watts
  • RMS Power: 160 Watts
  • Impedance: 3 Ohm
  • Strontium & Neodymium Magnets
  • Pair ~ 90dB

SPECS

SKU
EXL-SQ6.9
Speaker Type
2-Way Coaxial
Nominal Size
6x9"
Voice Coil
BASV 1.14"
RMS Power
160 Watts
MAX Power
560 Watts
Tweeter
1.14"
Nominal Impedance
3 Ohm
Sensitivity
90dB/1w/m
Frequency Response
55-22KHz
Tweeter Material
Pei Dome Neodymium Magnet
Magnet Material
Strontium
Magnet Weight
19.8 oz
Woofer Cone Material
Glass Fiber Cone
Woofer Surround Material
Rubber edge

Product Overview

EXL-SQ6.9

6x9" 2-Way Coaxial Speaker with Fiber Glass Cone — 160W RMS, 3-Ohm

Instantly increase the sound quality in your car and get extremely loud with the EXL-SQ6.9. The 2-way design equips it with both a woofer and a tweeter working harmoniously to produce a full and dynamic sound — reproducing both high and low frequencies with remarkable accuracy.

The 3-ohm impedance makes these speakers extremely easy to incorporate into any high-powered audio system.

The glass fiber cone provides stiffness, ensures accurate sound reproduction, and minimizes distortion. Its lightweight design enables faster and more responsive changes to the signal, while also maximizing energy efficiency.

Every component, from the advanced PEI dome tweeter to the neodymium magnets and black glass fiber cone, has been carefully chosen and tuned to deliver the best possible audio performance — every detail of your music reproduced with incredible accuracy.

Free shipping on orders $100+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us