Product Overview

Description

The Black Rhino Sierra is a flow formed aluminum wheel in a Gloss Black with Milled Spokes finish, offered here in 17, 18, 20 and 22 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Flow Formed Aluminum
  • Finish: Gloss Black with Milled Spokes
  • Diameters: 17, 18, 20 and 22 in; widths: 9, 10 and 11.5 in
  • Lug counts: 5, 6 and 8
  • Load rating: 2,250–3,500 lbs per wheel, depending on size

Specifications

Brand Black Rhino
Style Sierra
Finish Gloss Black with Milled Spokes
Construction Flow Formed Aluminum
Diameter 17, 18, 20 and 22 in
Width 9, 10 and 11.5 in
Bolt patterns 5x127, 5x139.7, 5x150, 6x120, 6x135, 6x139.7, 8x165.1, 8x170, 8x180
Lug count 5, 6 and 8
Offset -44 to +12 mm
Centerbore 67.06, 78.1, 87.1, 110.1, 112.1, 122.4, 125.1 mm
Load rating 2,250–3,500 lbs
Beadlock No
Wheel weight 30.4–46.2 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x9 5x127 5x5 -12 mm 4.53 in 78.1 mm 2,250 lbs 31.4 lbs 1790SRA-25127B78 4 × 1790SRA-25127B78
17x9 6x139.7 6x5.5 -12 mm 4.53 in 112.1 mm 2,250 lbs 32.5 lbs 1790SRA-26140B12 4 × 1790SRA-26140B12
17x9 8x165.1 8x6.5 -12 mm 4.53 in 122.4 mm 3,500 lbs 32.5 lbs 1790SRA-28165B22 4 × 1790SRA-28165B22
17x9 6x120 – +12 mm 5.47 in 67.06 mm 2,250 lbs 30.4 lbs 1790SRA126120B67 4 × 1790SRA126120B67
17x9 6x135 – +12 mm 5.47 in 87.1 mm 2,250 lbs 30.4 lbs 1790SRA126135B87 4 × 1790SRA126135B87
17x9 8x170 – +12 mm 5.47 in 125.1 mm 3,500 lbs 30.4 lbs 1790SRA128170B25 4 × 1790SRA128170B25
18x9 6x120 – +12 mm 5.47 in 67.06 mm 2,250 lbs 31.9 lbs 1890SRA126120B67 4 × 1890SRA126120B67
20x9 6x139.7 6x5.5 +12 mm 5.47 in 112.1 mm 2,250 lbs 36.2 lbs 2090SRA126140B12 4 × 2090SRA126140B12
20x10 5x127 5x5 -23 mm 4.59 in 78.1 mm 2,250 lbs 39.2 lbs 2010SRA-35127B78 4 × 2010SRA-35127B78
20x10 5x139.7 5x5.5 -12 mm 5.03 in 78.1 mm 2,250 lbs 38.3 lbs 2010SRA-25140B78 4 × 2010SRA-25140B78
20x10 5x150 – +0 mm 5.5 in 110.1 mm 2,250 lbs 36.2 lbs 2010SRA005150B10 4 × 2010SRA005150B10
22x11.5 8x180 – -44 mm 4.52 in 125.1 mm 3,500 lbs 46.2 lbs 2215SRA-48180B25 4 × 2215SRA-48180B25

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us