Product Overview

Description

The Black Rhino Calico is a cast aluminum wheel in a Matte Black finish, offered here in 17 and 20 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Cast Aluminum
  • Finish: Matte Black
  • Diameters: 17 and 20 in; widths: 8.5 and 9 in
  • Lug counts: 5 and 6
  • Load rating: 2,100–2,500 lbs per wheel, depending on size

Specifications

Brand Black Rhino
Style Calico
Finish Matte Black
Construction Cast Aluminum
Diameter 17 and 20 in
Width 8.5 and 9 in
Bolt patterns 5x114.3, 5x120, 5x127, 6x135, 6x139.7
Lug count 5 and 6
Offset -10 to +34 mm
Centerbore 71.5, 72.56, 74.1, 87.1, 106.1 mm
Load rating 2,100–2,500 lbs
Beadlock No
Wheel weight 26–35.6 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8.5 5x127 5x5 -10 mm 4.36 in 71.5 mm 2,500 lbs 28.8 lbs BR001MX17855010N 4 × BR001MX17855010N
17x8.5 6x139.7 6x5.5 -10 mm 4.36 in 106.1 mm 2,500 lbs 28.8 lbs BR001MX17856810N 4 × BR001MX17856810N
17x8.5 5x127 5x5 +0 mm 4.75 in 71.5 mm 2,500 lbs 27.3 lbs BR001MX17855000 4 × BR001MX17855000
17x8.5 6x135 – +0 mm 4.75 in 87.1 mm 2,500 lbs 27.3 lbs BR001MX17856300 4 × BR001MX17856300
17x8.5 6x139.7 6x5.5 +0 mm 4.75 in 106.1 mm 2,500 lbs 27.3 lbs BR001MX17856800 4 × BR001MX17856800
17x8.5 5x114.3 5x4.5 +34 mm 6.09 in 72.56 mm 2,100 lbs 26 lbs BR001MX17851234 4 × BR001MX17851234
17x8.5 5x120 – +34 mm 6.09 in 74.1 mm 2,100 lbs 26 lbs BR001MX17855234 4 × BR001MX17855234
17x8.5 5x127 5x5 +34 mm 6.09 in 71.5 mm 2,100 lbs 26.2 lbs BR001MX17855034 4 × BR001MX17855034
20x9 5x127 5x5 +0 mm 5 in 71.5 mm 2,500 lbs 35.6 lbs BR001MX20905000 4 × BR001MX20905000
20x9 6x135 – +0 mm 5 in 87.1 mm 2,500 lbs 35 lbs BR001MX20906300 4 × BR001MX20906300
20x9 6x139.7 6x5.5 +0 mm 5 in 106.1 mm 2,500 lbs 35 lbs BR001MX20906800 4 × BR001MX20906800

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us