Product Overview

Description

The Black Rhino BR036 Basin is a flow formed aluminum wheel in a Gloss Silver with Machined Face finish, offered here in 17 in diameter. Priced per wheel, or as a set of 4.

Key features

  • Construction: Flow Formed Aluminum
  • Finish: Gloss Silver with Machined Face
  • Diameter: 17 in; widths: 8 and 8.5 in
  • Lug counts: 5 and 6
  • Load rating: 2,650–4,000 lbs per wheel, depending on size

Specifications

Brand Black Rhino
Style BR036 Basin
Finish Gloss Silver with Machined Face
Construction Flow Formed Aluminum
Diameter 17 in
Width 8 and 8.5 in
Bolt patterns 5x114.3, 5x127, 6x114.3, 6x130, 6x135, 6x139.7
Lug count 5 and 6
Offset +0 to +32 mm
Centerbore 66.06, 71.5, 72.56, 84.1, 87.1, 95.1, 100.3, 106.1 mm
Load rating 2,650–4,000 lbs
Beadlock No
Wheel weight 25.1–27.3 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8 5x114.3 5x4.5 +32 mm 5.76 in 72.56 mm 4,000 lbs 26.9 lbs BR036SD17801232 4 × BR036SD17801232
17x8 5x127 5x5 +32 mm 5.76 in 71.5 mm 4,000 lbs 27.3 lbs BR036SD17805032 4 × BR036SD17805032
17x8 6x130 – +32 mm 5.76 in 84.1 mm 4,000 lbs 27.3 lbs BR036SD17803832 4 × BR036SD17803832
17x8 6x139.7 6x5.5 +32 mm 5.76 in 95.1 mm 4,000 lbs 27.1 lbs BR036SD17806232 4 × BR036SD17806232
17x8 6x139.7 6x5.5 +32 mm 5.76 in 106.1 mm 4,000 lbs 26.9 lbs BR036SD17806832 4 × BR036SD17806832
17x8.5 5x127 5x5 +0 mm 4.75 in 71.5 mm 2,650 lbs 25.4 lbs BR036SD17855000 4 × BR036SD17855000
17x8.5 6x135 – +0 mm 4.75 in 87.1 mm 2,650 lbs 25.8 lbs BR036SD17856300 4 × BR036SD17856300
17x8.5 6x139.7 6x5.5 +0 mm 4.75 in 106.1 mm 2,650 lbs 25.1 lbs BR036SD17856800 4 × BR036SD17856800
17x8.5 5x127 5x5 +25 mm 5.73 in 71.5 mm 2,650 lbs 26.2 lbs BR036SD17855025 4 × BR036SD17855025
17x8.5 6x114.3 6x4.5 +25 mm 5.73 in 66.06 mm 2,650 lbs 26 lbs BR036SD17856425 4 × BR036SD17856425
17x8.5 6x135 – +25 mm 5.73 in 87.1 mm 2,650 lbs 26.2 lbs BR036SD17856325 4 × BR036SD17856325
17x8.5 6x139.7 6x5.5 +25 mm 5.73 in 95.1 mm 2,650 lbs 26 lbs BR036SD17856225 4 × BR036SD17856225
17x8.5 6x139.7 6x5.5 +25 mm 5.73 in 100.3 mm 2,650 lbs 25.9 lbs BR036SD17856U25 4 × BR036SD17856U25
17x8.5 6x139.7 6x5.5 +25 mm 5.73 in 106.1 mm 2,650 lbs 25.8 lbs BR036SD17856825 4 × BR036SD17856825

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us