Product Overview

Description

The Black Rhino BR032 Echo is a flow formed aluminum wheel in a Matte Black finish, offered here in 17 and 18 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Flow Formed Aluminum
  • Finish: Matte Black
  • Diameters: 17 and 18 in; widths: 8.5 and 9 in
  • Lug counts: 6 and 8
  • Load rating: 2,750–4,500 lbs per wheel, depending on size

Specifications

Brand Black Rhino
Style BR032 Echo
Finish Matte Black
Construction Flow Formed Aluminum
Diameter 17 and 18 in
Width 8.5 and 9 in
Bolt patterns 6x135, 6x139.7, 8x165.1, 8x170, 8x180
Lug count 6 and 8
Offset +0 to +25 mm
Centerbore 87.1, 106.1, 124.2, 125.1 mm
Load rating 2,750–4,500 lbs
Beadlock No
Wheel weight 27.9–33 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8.5 6x135 – +0 mm 4.75 in 87.1 mm 2,750 lbs 28.4 lbs BR032MX17856300 4 × BR032MX17856300
17x8.5 6x139.7 6x5.5 +0 mm 4.75 in 106.1 mm 2,750 lbs 27.9 lbs BR032MX17856800 4 × BR032MX17856800
17x8.5 6x135 – +25 mm 5.73 in 87.1 mm 2,750 lbs – BR032MX17856325 4 × BR032MX17856325
17x8.5 6x139.7 6x5.5 +25 mm 5.73 in 106.1 mm 2,750 lbs – BR032MX17856825 4 × BR032MX17856825
18x9 6x135 – +12 mm 5.47 in 87.1 mm 2,750 lbs – BR032MX18906312 4 × BR032MX18906312
18x9 6x139.7 6x5.5 +12 mm 5.47 in 106.1 mm 2,750 lbs – BR032MX18906812 4 × BR032MX18906812
18x9 8x165.1 8x6.5 +12 mm 5.47 in 125.1 mm 4,500 lbs 32.6 lbs BR032MX18908012 4 × BR032MX18908012
18x9 8x170 – +12 mm 5.47 in 125.1 mm 4,500 lbs 32.6 lbs BR032MX18908712 4 × BR032MX18908712
18x9 8x180 – +12 mm 5.47 in 124.2 mm 4,500 lbs 33 lbs BR032MX18908812 4 × BR032MX18908812

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us