Product Overview

Description

The Black Rhino BR032 Echo is a flow formed aluminum wheel in a Gloss Silver with Machined Face finish, offered here in 17 and 18 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Flow Formed Aluminum
  • Finish: Gloss Silver with Machined Face
  • Diameters: 17 and 18 in; widths: 8.5 and 9 in
  • Lug counts: 6 and 8
  • Load rating: 2,750–4,500 lbs per wheel, depending on size

Specifications

Brand Black Rhino
Style BR032 Echo
Finish Gloss Silver with Machined Face
Construction Flow Formed Aluminum
Diameter 17 and 18 in
Width 8.5 and 9 in
Bolt patterns 6x135, 6x139.7, 8x165.1, 8x170, 8x180
Lug count 6 and 8
Offset +0 to +25 mm
Centerbore 87.1, 106.1, 124.2, 125.1 mm
Load rating 2,750–4,500 lbs
Beadlock No
Wheel weight 27.9–33 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8.5 6x135 – +0 mm 4.75 in 87.1 mm 2,750 lbs 28.4 lbs BR032SD17856300 4 × BR032SD17856300
17x8.5 6x139.7 6x5.5 +0 mm 4.75 in 106.1 mm 2,750 lbs 27.9 lbs BR032SD17856800 4 × BR032SD17856800
17x8.5 6x135 – +25 mm 5.73 in 87.1 mm 2,750 lbs – BR032SD17856325 4 × BR032SD17856325
17x8.5 6x139.7 6x5.5 +25 mm 5.73 in 106.1 mm 2,750 lbs – BR032SD17856825 4 × BR032SD17856825
18x9 6x135 – +12 mm 5.47 in 87.1 mm 2,750 lbs – BR032SD18906312 4 × BR032SD18906312
18x9 6x139.7 6x5.5 +12 mm 5.47 in 106.1 mm 2,750 lbs – BR032SD18906812 4 × BR032SD18906812
18x9 8x165.1 8x6.5 +12 mm 5.47 in 125.1 mm 4,500 lbs 32.6 lbs BR032SD18908012 4 × BR032SD18908012
18x9 8x170 – +12 mm 5.47 in 125.1 mm 4,500 lbs 32.6 lbs BR032SD18908712 4 × BR032SD18908712
18x9 8x180 – +12 mm 5.47 in 124.2 mm 4,500 lbs 33 lbs BR032SD18908812 4 × BR032SD18908812

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us