Product Overview

Description

The Black Rhino BR017 Etosha is a flow formed aluminum wheel in a Matte Bronze finish, offered here in 17 in diameter. Priced per wheel, or as a set of 4.

Key features

  • Construction: Flow Formed Aluminum
  • Finish: Matte Bronze
  • Diameter: 17 in; width: 8.5 in
  • Lug counts: 5 and 6
  • Load rating: 2,650 lbs per wheel

Specifications

Brand Black Rhino
Style BR017 Etosha
Finish Matte Bronze
Construction Flow Formed Aluminum
Diameter 17 in
Width 8.5 in
Bolt patterns 5x127, 6x114.3, 6x120, 6x135, 6x139.7
Lug count 5 and 6
Offset -10 to +20 mm
Centerbore 66.06, 66.9, 71.5, 87.1, 106.1 mm
Load rating 2,650 lbs
Beadlock No
Wheel weight 22.7–25.8 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8.5 5x127 5x5 -10 mm 4.36 in 71.5 mm 2,650 lbs 23.4 lbs BR017ZX17855010N 4 × BR017ZX17855010N
17x8.5 6x114.3 6x4.5 -10 mm 4.36 in 66.06 mm 2,650 lbs 23.1 lbs BR017ZX17856410N 4 × BR017ZX17856410N
17x8.5 6x120 – -10 mm 4.36 in 66.9 mm 2,650 lbs 23.1 lbs BR017ZX17857710N 4 × BR017ZX17857710N
17x8.5 6x139.7 6x5.5 -10 mm 4.36 in 106.1 mm 2,650 lbs 23.4 lbs BR017ZX17856810N 4 × BR017ZX17856810N
17x8.5 6x135 – +0 mm 4.75 in 87.1 mm 2,650 lbs 22.7 lbs BR017ZX17856300 4 × BR017ZX17856300
17x8.5 6x139.7 6x5.5 +12 mm 5.22 in 106.1 mm 2,650 lbs 25.8 lbs BR017ZX17856812 4 × BR017ZX17856812
17x8.5 5x127 5x5 +20 mm 5.54 in 71.5 mm 2,650 lbs 25.4 lbs BR017ZX17855020 4 × BR017ZX17855020
17x8.5 6x114.3 6x4.5 +20 mm 5.54 in 66.06 mm 2,650 lbs 25.1 lbs BR017ZX17856420 4 × BR017ZX17856420
17x8.5 6x120 – +20 mm 5.54 in 66.9 mm 2,650 lbs 25.1 lbs BR017ZX17857720 4 × BR017ZX17857720
17x8.5 6x135 – +20 mm 5.54 in 87.1 mm 2,650 lbs 25.4 lbs BR017ZX17856320 4 × BR017ZX17856320
17x8.5 6x139.7 6x5.5 +20 mm 5.54 in 106.1 mm 2,650 lbs 24.6 lbs BR017ZX17856820 4 × BR017ZX17856820

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us