Product Overview

Description

The Black Rhino BR012 Outback is a cast aluminum wheel in a Matte Black finish, offered here in 17 and 18 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Cast Aluminum
  • Finish: Matte Black
  • Diameters: 17 and 18 in; widths: 8 and 8.5 in
  • Lug counts: 5 and 6
  • Load rating: 3,150–3,700 lbs per wheel, depending on size

Specifications

Brand Black Rhino
Style BR012 Outback
Finish Matte Black
Construction Cast Aluminum
Diameter 17 and 18 in
Width 8 and 8.5 in
Bolt patterns 5x127, 5x150, 6x130, 6x135, 6x139.7
Lug count 5 and 6
Offset -10 to +40 mm
Centerbore 71.5, 84.1, 87.1, 106.1, 110.1 mm
Load rating 3,150–3,700 lbs
Beadlock No
Wheel weight 32–35 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8 5x127 5x5 +32 mm 5.76 in 71.5 mm 3,700 lbs 32.7 lbs BR012MX17805032 4 × BR012MX17805032
17x8 5x150 – +32 mm 5.76 in 110.1 mm 3,700 lbs 32 lbs BR012MX17805832 4 × BR012MX17805832
17x8 6x130 – +32 mm 5.76 in 84.1 mm 3,700 lbs 32.7 lbs BR012MX17803832 4 × BR012MX17803832
17x8 6x135 – +32 mm 5.76 in 87.1 mm 3,700 lbs 32.7 lbs BR012MX17806332 4 × BR012MX17806332
17x8 6x139.7 6x5.5 +32 mm 5.76 in 106.1 mm 3,700 lbs 32 lbs BR012MX17806832 4 × BR012MX17806832
17x8 6x130 – +40 mm 6.07 in 84.1 mm 3,150 lbs 32.2 lbs BR012MX17803840 4 × BR012MX17803840
17x8.5 5x127 5x5 -10 mm 4.36 in 71.5 mm 3,700 lbs – BR012MX17855010N 4 × BR012MX17855010N
17x8.5 5x150 – -10 mm 4.36 in 110.1 mm 3,700 lbs 33.1 lbs BR012MX17855810N 4 × BR012MX17855810N
17x8.5 6x135 – -10 mm 4.36 in 87.1 mm 3,700 lbs – BR012MX17856310N 4 × BR012MX17856310N
17x8.5 6x139.7 6x5.5 -10 mm 4.36 in 106.1 mm 3,700 lbs 33.1 lbs BR012MX17856810N 4 × BR012MX17856810N
18x8 5x127 5x5 +32 mm 5.76 in 71.5 mm 3,700 lbs 35 lbs BR012MX18805032 4 × BR012MX18805032
18x8 5x150 – +32 mm 5.76 in 110.1 mm 3,700 lbs – BR012MX18805832 4 × BR012MX18805832
18x8 6x130 – +32 mm 5.76 in 84.1 mm 3,700 lbs 35 lbs BR012MX18803832 4 × BR012MX18803832
18x8 6x135 – +32 mm 5.76 in 87.1 mm 3,700 lbs 35 lbs BR012MX18806332 4 × BR012MX18806332
18x8 6x139.7 6x5.5 +32 mm 5.76 in 106.1 mm 3,700 lbs – BR012MX18806832 4 × BR012MX18806832
18x8.5 5x127 5x5 +0 mm 4.75 in 71.5 mm 3,700 lbs 34.4 lbs BR012MX18855000 4 × BR012MX18855000
18x8.5 5x150 – +0 mm 4.75 in 110.1 mm 3,700 lbs 33.5 lbs BR012MX18855800 4 × BR012MX18855800
18x8.5 6x135 – +0 mm 4.75 in 87.1 mm 3,700 lbs 34.4 lbs BR012MX18856300 4 × BR012MX18856300
18x8.5 6x139.7 6x5.5 +0 mm 4.75 in 106.1 mm 3,700 lbs 33.5 lbs BR012MX18856800 4 × BR012MX18856800

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us