Product Overview

Description

The American Force K08 Carver is a monoblock forged UTV wheel in a Polished finish, offered here in 20, 22 and 24 in diameters. Priced per wheel. Made to order. Lead time is confirmed after you order.

Key features

  • Construction: Monoblock Forged
  • Finish: Polished
  • Diameters: 20, 22 and 24 in; width: 7 in
  • Lug count: 4
  • Load rating: 1,500 lbs per wheel
  • Directional design: left and right wheels are separate part numbers

Specifications

Brand American Force
Style K08 Carver
Finish Polished
Construction Monoblock Forged
Diameter 20, 22 and 24 in
Width 7 in
Bolt patterns 4x137, 4x156
Lug count 4
Offset +0 mm
Centerbore 115, 172 mm
Load rating 1,500 lbs
Beadlock No

Sizes in this listing

Size Bolt pattern Offset Side Backspacing Centerbore Load rating Part number
20x7 4x137 +0 mm Left 4 in 172 mm 1,500 lbs AFTOK08LE172-1-21
20x7 4x137 +0 mm Right 4 in 172 mm 1,500 lbs AFTOK08RE172-1-21
20x7 4x156 +0 mm Left 4 in 115 mm 1,500 lbs AFTOK08LE111-1-21
20x7 4x156 +0 mm Right 4 in 115 mm 1,500 lbs AFTOK08RE111-1-21
22x7 4x137 +0 mm Left 4 in 172 mm 1,500 lbs AFTLK08LE172-1-21
22x7 4x137 +0 mm Right 4 in 172 mm 1,500 lbs AFTLK08RE172-1-21
22x7 4x156 +0 mm Left 4 in 115 mm 1,500 lbs AFTLK08LE111-1-21
22x7 4x156 +0 mm Right 4 in 115 mm 1,500 lbs AFTLK08RE111-1-21
24x7 4x137 +0 mm Left 4 in 172 mm 1,500 lbs AFTYK08LE172-1-21
24x7 4x137 +0 mm Right 4 in 172 mm 1,500 lbs AFTYK08RE172-1-21
24x7 4x156 +0 mm Left 4 in 115 mm 1,500 lbs AFTYK08LE111-1-21
24x7 4x156 +0 mm Right 4 in 115 mm 1,500 lbs AFTYK08RE111-1-21

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us