Product Overview

Description

The American Force H38 Nova SS is a monoblock forged wheel in a Polished finish, offered here in 20, 22, 24 and 26 in diameters. Priced per wheel. Made to order. Lead time is confirmed after you order.

Key features

  • Construction: Monoblock Forged
  • Finish: Polished
  • Diameters: 20, 22, 24 and 26 in; widths: 10, 12 and 14 in
  • Lug counts: 6 and 8
  • Load rating: 2,500–3,500 lbs per wheel, depending on size
  • Directional design: left and right wheels are separate part numbers

Specifications

Brand American Force
Style H38 Nova SS
Finish Polished
Construction Monoblock Forged
Diameter 20, 22, 24 and 26 in
Width 10, 12 and 14 in
Bolt patterns 6x135, 8x165.1, 8x170, 8x180
Lug count 6 and 8
Offset -73 to -25 mm
Centerbore 117, 124, 125 mm
Load rating 2,500–3,500 lbs
Beadlock No

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Side Backspacing Centerbore Load rating Part number
20x12 8x170 – -40 mm – 4.93 in Not stated by supplier 3,500 lbs AFTEH38F25-1-20
22x10 8x165.1 8x6.5 -25 mm – 4.52 in 117 mm 3,500 lbs AFTGH38C17-1-20
22x10 8x180 – -25 mm Left 4.52 in 124 mm 3,500 lbs AFTGH38LG24-1-21
22x10 8x180 – -25 mm Right 4.52 in 124 mm 3,500 lbs AFTGH38RG24-1-21
22x12 6x135 – -40 mm – 4.93 in Not stated by supplier 2,500 lbs AFTJH38W87-1-20
22x12 8x165.1 8x6.5 -40 mm Left 4.93 in Not stated by supplier 3,500 lbs AFTJH38LD22-1-20
22x12 8x165.1 8x6.5 -40 mm Right 4.93 in Not stated by supplier 3,500 lbs AFTJH38RD22-1-20
22x12 8x170 – -40 mm Left 4.93 in Not stated by supplier 3,500 lbs AFTJH38LF25-1-20
22x12 8x170 – -40 mm Right 4.93 in Not stated by supplier 3,500 lbs AFTJH38RF25-1-20
22x14 8x170 – -72 mm – 4.67 in 125 mm 3,500 lbs AFTKH38F25-1-0
24x12 8x180 – -40 mm – 4.93 in 124 mm 3,500 lbs AFTNH38G24-1-21
24x14 6x135 – -73 mm – 4.63 in Not stated by supplier 2,500 lbs AFTPH38W87-1-20
26x14 8x170 – -72 mm – 4.67 in Not stated by supplier 3,500 lbs AFTQH38F25-1-20

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us