Product Overview

Description

The American Force CKH36 Blaster CC is a monoblock forged wheel in a Polished finish, offered here in 22 and 24 in diameters. Priced per wheel. Made to order. Lead time is confirmed after you order.

Key features

  • Construction: Monoblock Forged
  • Finish: Polished
  • Diameters: 22 and 24 in; widths: 12 and 14 in
  • Lug counts: 6 and 8
  • Load rating: 3,500 lbs per wheel

Specifications

Brand American Force
Style CKH36 Blaster CC
Finish Polished
Construction Monoblock Forged
Diameter 22 and 24 in
Width 12 and 14 in
Bolt patterns 6x139.7, 8x180
Lug count 6 and 8
Offset -90 to -55 mm
Centerbore 78.1, 124 mm
Load rating 3,500 lbs
Beadlock No

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Part number
22x12 6x139.7 6x5.5 -55 mm 4.33 in 78.1 mm 3,500 lbs AFTJCKH36R78-1-21
24x14 8x180 – -90 mm 3.96 in 124 mm 3,500 lbs AFTPCKH36G24-1-21

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us