Product Overview

Description

The American Force 76 Blade SS is a monoblock forged wheel in a Polished finish, offered here in 26 in diameter. Priced per wheel. Made to order. Lead time is confirmed after you order.

Key features

  • Construction: Monoblock Forged
  • Finish: Polished
  • Diameter: 26 in; widths: 12, 14 and 16 in
  • Lug counts: 6 and 8
  • Load rating: 3,500 lbs per wheel
  • Directional design: left and right wheels are separate part numbers

Specifications

Brand American Force
Style 76 Blade SS
Finish Polished
Construction Monoblock Forged
Diameter 26 in
Width 12, 14 and 16 in
Bolt patterns 6x135, 6x139.7, 8x165.1, 8x170, 8x180
Lug count 6 and 8
Offset -101 to -40 mm
Centerbore 78.1, 87, 122, 124, 125 mm
Load rating 3,500 lbs
Beadlock No

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Side Backspacing Centerbore Load rating Part number
26x12 6x135 – -40 mm Left 4.93 in 87 mm 3,500 lbs AFTI76LW87-1-21
26x12 6x135 – -40 mm Right 4.93 in 87 mm 3,500 lbs AFTI76RW87-1-21
26x12 6x139.7 6x5.5 -40 mm Left 4.93 in 78.1 mm 3,500 lbs AFTI76LR78-1-21
26x12 6x139.7 6x5.5 -40 mm Right 4.93 in 78.1 mm 3,500 lbs AFTI76RR78-1-21
26x12 8x165.1 8x6.5 -40 mm Left 4.93 in 122 mm 3,500 lbs AFTI76LD22-1-21
26x12 8x165.1 8x6.5 -40 mm Right 4.93 in 122 mm 3,500 lbs AFTI76RD22-1-21
26x12 8x170 – -40 mm Left 4.93 in 125 mm 3,500 lbs AFTI76LF25-1-21
26x12 8x170 – -40 mm Right 4.93 in 125 mm 3,500 lbs AFTI76RF25-1-21
26x12 8x180 – -40 mm Left 4.93 in 124 mm 3,500 lbs AFTI76LG24-1-21
26x12 8x180 – -40 mm Right 4.93 in 124 mm 3,500 lbs AFTI76RG24-1-21
26x14 6x135 – -73 mm Left 4.63 in 87 mm 3,500 lbs AFTQ76LW87-1-21
26x14 6x135 – -73 mm Right 4.63 in 87 mm 3,500 lbs AFTQ76RW87-1-21
26x14 6x139.7 6x5.5 -73 mm Left 4.63 in 78.1 mm 3,500 lbs AFTQ76LR78-1-21
26x14 6x139.7 6x5.5 -73 mm Right 4.63 in 78.1 mm 3,500 lbs AFTQ76RR78-1-21
26x14 8x165.1 8x6.5 -73 mm Left 4.63 in 122 mm 3,500 lbs AFTQ76LD22-1-21
26x14 8x165.1 8x6.5 -73 mm Right 4.63 in 122 mm 3,500 lbs AFTQ76RD22-1-21
26x14 8x170 – -73 mm Left 4.63 in 125 mm 3,500 lbs AFTQ76LF25-1-21
26x14 8x170 – -73 mm Right 4.63 in 125 mm 3,500 lbs AFTQ76RF25-1-21
26x14 8x180 – -73 mm Left 4.63 in 124 mm 3,500 lbs AFTQ76LG24-1-21
26x14 8x180 – -73 mm Right 4.63 in 124 mm 3,500 lbs AFTQ76RG24-1-21
26x16 6x135 – -101 mm Left 4.52 in 87 mm 3,500 lbs AFTS76LW87-1-21
26x16 6x135 – -101 mm Right 4.52 in 87 mm 3,500 lbs AFTS76RW87-1-21
26x16 6x139.7 6x5.5 -101 mm Left 4.52 in 78.1 mm 3,500 lbs AFTS76LR78-1-21
26x16 6x139.7 6x5.5 -101 mm Right 4.52 in 78.1 mm 3,500 lbs AFTS76RR78-1-21
26x16 8x165.1 8x6.5 -101 mm Left 4.52 in 122 mm 3,500 lbs AFTS76LD22-1-21
26x16 8x165.1 8x6.5 -101 mm Right 4.52 in 122 mm 3,500 lbs AFTS76RD22-1-21
26x16 8x170 – -101 mm Left 4.52 in 125 mm 3,500 lbs AFTS76LF25-1-21
26x16 8x170 – -101 mm Right 4.52 in 125 mm 3,500 lbs AFTS76RF25-1-21
26x16 8x180 – -101 mm Left 4.52 in 124 mm 3,500 lbs AFTS76LG24-1-21
26x16 8x180 – -101 mm Right 4.52 in 124 mm 3,500 lbs AFTS76RG24-1-21

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us