Product Overview

Description

The American Force 74 Octane SS is a monoblock forged wheel in a Polished finish, offered here in 24 in diameter. Priced per wheel. Made to order. Lead time is confirmed after you order.

Key features

  • Construction: Monoblock Forged
  • Finish: Polished
  • Diameter: 24 in; widths: 11, 12 and 14 in
  • Lug counts: 5, 6 and 8
  • Load rating: 3,500 lbs per wheel
  • Directional design: left and right wheels are separate part numbers

Specifications

Brand American Force
Style 74 Octane SS
Finish Polished
Construction Monoblock Forged
Diameter 24 in
Width 11, 12 and 14 in
Bolt patterns 5x135, 5x150, 6x135, 6x139.7, 8x165.1, 8x170, 8x180
Lug count 5, 6 and 8
Offset -73 to +0 mm
Centerbore 78.1, 87, 87.1, 110, 122, 122.4, 124, 124.2, 125, 125.1 mm
Load rating 3,500 lbs
Beadlock No

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Side Backspacing Centerbore Load rating Part number
24x11 6x135 – +0 mm Left 6 in 87 mm 3,500 lbs AFTM74LW87-1-21
24x11 6x135 – +0 mm Right 6 in 87 mm 3,500 lbs AFTM74RW87-1-21
24x11 6x139.7 6x5.5 +0 mm Left 6 in 78.1 mm 3,500 lbs AFTM74LR78-1-21
24x11 6x139.7 6x5.5 +0 mm Right 6 in 78.1 mm 3,500 lbs AFTM74RR78-1-21
24x11 8x165.1 8x6.5 +0 mm Left 6 in 122 mm 3,500 lbs AFTM74LD22-1-21
24x11 8x165.1 8x6.5 +0 mm Right 6 in 122 mm 3,500 lbs AFTM74RD22-1-21
24x11 8x170 – +0 mm Left 6 in 125 mm 3,500 lbs AFTM74LF25-1-21
24x11 8x170 – +0 mm Right 6 in 125 mm 3,500 lbs AFTM74RF25-1-21
24x11 8x180 – +0 mm Left 6 in 124 mm 3,500 lbs AFTM74LG24-1-21
24x11 8x180 – +0 mm Right 6 in 124 mm 3,500 lbs AFTM74RG24-1-21
24x12 5x135 – -40 mm – 4.93 in 87 mm 3,500 lbs AFTN74M87-1-21
24x12 5x150 – -40 mm – 4.93 in 110 mm 3,500 lbs AFTN74T10-1-21
24x12 6x139.7 6x5.5 -40 mm Left 4.93 in 78.1 mm 3,500 lbs AFTN74LR78-1-21
24x12 6x139.7 6x5.5 -40 mm Right 4.93 in 78.1 mm 3,500 lbs AFTN74RR78-1-21
24x12 8x165.1 8x6.5 -40 mm Left 4.93 in 122 mm 3,500 lbs AFTN74LD22-1-21
24x12 8x165.1 8x6.5 -40 mm Right 4.93 in 122 mm 3,500 lbs AFTN74RD22-1-21
24x12 8x170 – -40 mm Left 4.93 in 125 mm 3,500 lbs AFTN74LF25-1-21
24x12 8x170 – -40 mm Right 4.93 in 125 mm 3,500 lbs AFTN74RF25-1-21
24x12 8x180 – -40 mm Left 4.93 in 124 mm 3,500 lbs AFTN74LG24-1-21
24x12 8x180 – -40 mm Right 4.93 in 124 mm 3,500 lbs AFTN74RG24-1-21
24x14 6x135 – -73 mm Left 4.63 in 87.1 mm 3,500 lbs AFTP74LW88-1-21
24x14 6x135 – -73 mm Right 4.63 in 87.1 mm 3,500 lbs AFTP74RW88-1-21
24x14 6x139.7 6x5.5 -73 mm Left 4.63 in 78.1 mm 3,500 lbs AFTP74LR80-1-21
24x14 6x139.7 6x5.5 -73 mm Right 4.63 in 78.1 mm 3,500 lbs AFTP74RR80-1-21
24x14 8x165.1 8x6.5 -73 mm Left 4.63 in 122.4 mm 3,500 lbs AFTP74LD22-1-21
24x14 8x165.1 8x6.5 -73 mm Right 4.63 in 122.4 mm 3,500 lbs AFTP74RD22-1-21
24x14 8x170 – -73 mm Left 4.63 in 125.1 mm 3,500 lbs AFTP74LF25-1-21
24x14 8x170 – -73 mm Right 4.63 in 125.1 mm 3,500 lbs AFTP74RF25-1-21
24x14 8x180 – -73 mm Left 4.63 in 124.2 mm 3,500 lbs AFTP74LG24-1-21
24x14 8x180 – -73 mm Right 4.63 in 124.2 mm 3,500 lbs AFTP74RG24-1-21

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us