Product Overview

Description

Product Overview


Quality Sound All-Around
Take your off-road experience to the next level with the loaded RZR-PROFD8LD front door panels, featuring the NXL-IQ8/BK 2-way coaxial speaker. Designed for 2-door and 4-door 2020-2024 Polaris RZR-PROs, these loaded front panels keep the volume pumping wherever you go.

Sleek Durability
These front door panels use polyethylene with a black finish, along with a water resistance level of IP65, to give you a durable and stylish OEM fit and texture to your RZR-PRO.

Power Up Your Ride
The NXL-IQ8/BK coaxial speakers give your RZR-PRO a real boost with a power rating of 175W RMS / 350W MAX and a frequency response of 35Hz-20kHz. A floating bullet tweeter balances out the booming sounds with clear and crisp highs, courtesy of an aluminum diaphragm and neodymium magnets.

Style You Control
Digital LED lights give both your panels and speakers extra flair with changeable lights and colors to match your mood and vibe. The LED lights are controlled with the LC-DRM (sold separately) via the LC app (available on Android and iOS).

On and Off the Road
Made for the adventurous, the RZR series gives you quality performance, from speakers and amplifiers to enclosures and pocket mounts. With DS18, your RZR is ready for anything.

SPECS

General
Panel Type Front Bafle
Panel Material Polyethylene (PE)
Finish Material Black / OEM Texture
UV Protection Yes
IP Rating IP65
Input Wire LED + SPK 5 Core OFC Tinned (2ft / 0.6m)
Sold in Pairs Left & Right
OEM Fit Yes
Compatible Model / Year RZR-PRO / 2020-2024 2 & 4 Doors Models
Speaker Specifications (NXL-IQ8/BK)
Speaker Type / Size 8" Marine Grade Coaxial Speaker with Digital LED Lights and Bullet Tweeter
Total Impedance 4-Ohm
RMS Power Handling 175W
MAX Power Handling 350W
Sensitivity (1w/1m) 96dB
Frequency Response 35Hz - 20KHz
Recommended High-Pass Crossover 40Hz
Voice Coil Diameter 1.5" / 38.6mm
Voice Coil Former Material Glass Fiber
Winding Material CCAW
Cone Material Polypropylene Injected (PPI)
Surround Material Rubber
Basket Material Injection Molded Composite PC with UV Protection coating
Magnet Material Ferrite + Neodymium
Magnet Weight 24 oz + 1.1oz
Tweeter Specifications (NXL-IQ8/BK)
Speaker Type Floating Bullet Tweeter
Voice Coil Diameter 1" / 25.4mm
Voice Coil Former Material Kapton
Winding Material CCAW
Diaphragm Material Aluminum
Bullet Material Injection Molded Composite PC with UV Protection coating
Magnet Material Neodymium (N35H)
Magnet Weight 0.4 Oz
Measurement
Panel Overall Height 13.42" / 341mm
Panel Overall Width 25.23" / 641mm
Panel Overall Depth 3.11" / 79mm

Free shipping on orders $100+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us