Product Overview

Description

The KMC KS436 Impact Forged Beadlock is a UTV wheel in a Raw Machined Forged finish, offered here in 15 in diameter. Priced per wheel, or as a set of 4.

Key features

  • Construction: Monoblock Forged
  • Finish: Raw Machined Forged
  • Beadlock wheel
  • Diameter: 15 in; width: 6 in
  • Lug counts: 4 and 6
  • Load rating: 1,250 lbs per wheel

Specifications

Brand KMC
Style KS436 Impact Forged Beadlock
Finish Raw Machined Forged
Construction Monoblock Forged
Diameter 15 in
Width 6 in
Bolt patterns 4x137, 4x156, 6x139.7
Lug count 4 and 6
Offset +38 to +50 mm
Centerbore 96, 100.3, 115.1 mm
Load rating 1,250 lbs
Beadlock Yes
Use Off-road use only (manufacturer's statement)
Wheel weight 13.9–18 lbs
Set of 4 Four wheels

Note from KMC: beadlock wheels are sold for off-road use only. Off-road-use-only wheels are illegal on public roads in many states and provinces, as they are intended only for racing and/or off-road vehicles.

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
15x6 4x137 – +38 mm 5 in 96 mm 1,250 lbs 14 lbs KS436DX15604838 4 × KS436DX15604838
15x6 4x156 – +38 mm 5 in 115.1 mm 1,250 lbs 13.9 lbs KS436DX15604438 4 × KS436DX15604438
15x6 6x139.7 6x5.5 +38 mm 5 in 100.3 mm 1,250 lbs 17.3 lbs KS436DX15606238 4 × KS436DX15606238
15x6 6x139.7 6x5.5 +50 mm 5.47 in 100.3 mm 1,250 lbs 18 lbs KS436DX15606250 4 × KS436DX15606250

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us