Product Overview

Description

The KMC KM729 Range is a flow formed aluminum wheel in a Metallic Blue finish, offered here in 17 in diameter. Priced per wheel, or as a set of 4.

Key features

  • Construction: Flow Formed Aluminum
  • Finish: Metallic Blue
  • Diameter: 17 in; width: 8.5 in
  • Lug counts: 5 and 6
  • Load rating: 2,500 lbs per wheel

Specifications

Brand KMC
Style KM729 Range
Finish Metallic Blue
Construction Flow Formed Aluminum
Diameter 17 in
Width 8.5 in
Bolt patterns 5x127, 5x150, 6x114.3, 6x120, 6x135, 6x139.7
Lug count 5 and 6
Offset -10 to +0 mm
Centerbore 66.06, 66.9, 71.5, 87.1, 106.1, 110.1 mm
Load rating 2,500 lbs
Beadlock No
Wheel weight 24.9–26.7 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8.5 5x127 5x5 -10 mm 4.36 in 71.5 mm 2,500 lbs 26.7 lbs KM729LX17855010N 4 × KM729LX17855010N
17x8.5 5x150 – -10 mm 4.36 in 110.1 mm 2,500 lbs 25.6 lbs KM729LX17855810N 4 × KM729LX17855810N
17x8.5 6x114.3 6x4.5 -10 mm 4.36 in 66.06 mm 2,500 lbs 26.7 lbs KM729LX17856410N 4 × KM729LX17856410N
17x8.5 6x120 – -10 mm 4.36 in 66.9 mm 2,500 lbs 26.7 lbs KM729LX17857710N 4 × KM729LX17857710N
17x8.5 6x135 – -10 mm 4.36 in 87.1 mm 2,500 lbs 26.7 lbs KM729LX17856310N 4 × KM729LX17856310N
17x8.5 6x139.7 6x5.5 -10 mm 4.36 in 106.1 mm 2,500 lbs 26 lbs KM729LX17856810N 4 × KM729LX17856810N
17x8.5 5x127 5x5 +0 mm 4.75 in 71.5 mm 2,500 lbs 26 lbs KM729LX17855000 4 × KM729LX17855000
17x8.5 5x150 – +0 mm 4.75 in 110.1 mm 2,500 lbs 24.9 lbs KM729LX17855800 4 × KM729LX17855800
17x8.5 6x114.3 6x4.5 +0 mm 4.75 in 66.06 mm 2,500 lbs 26 lbs KM729LX17856400 4 × KM729LX17856400
17x8.5 6x120 – +0 mm 4.75 in 66.9 mm 2,500 lbs 26 lbs KM729LX17857700 4 × KM729LX17857700
17x8.5 6x135 – +0 mm 4.75 in 87.1 mm 2,500 lbs 25.6 lbs KM729LX17856300 4 × KM729LX17856300
17x8.5 6x139.7 6x5.5 +0 mm 4.75 in 106.1 mm 2,500 lbs 24.9 lbs KM729LX17856800 4 × KM729LX17856800

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us