Product Overview

Description

The KMC KM708 Bully is a cast aluminum wheel in a Satin Black finish, offered here in 17 in diameter. Priced per wheel, or as a set of 4.

Key features

  • Construction: Cast Aluminum
  • Finish: Satin Black
  • Diameter: 17 in; width: 8 in
  • Lug count: 5
  • Load rating: 1,750 lbs per wheel

Specifications

Brand KMC
Style KM708 Bully
Finish Satin Black
Construction Cast Aluminum
Diameter 17 in
Width 8 in
Bolt patterns 5x108, 5x110, 5x112, 5x114.3, 5x120
Lug count 5
Offset +38 mm
Centerbore 66.56, 72.56, 74.1 mm
Load rating 1,750 lbs
Beadlock No
Wheel weight 23.5 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8 5x108 5x4.25 +38 mm 6 in 72.56 mm 1,750 lbs 23.5 lbs KM70878045738 4 × KM70878045738
17x8 5x110 – +38 mm 6 in 72.56 mm 1,750 lbs 23.5 lbs KM70878042738 4 × KM70878042738
17x8 5x112 – +38 mm 6 in 66.56 mm 1,750 lbs 23.5 lbs KM70878057738 4 × KM70878057738
17x8 5x114.3 5x4.5 +38 mm 6 in 72.56 mm 1,750 lbs 23.5 lbs KM70878012738 4 × KM70878012738
17x8 5x120 – +38 mm 6 in 74.1 mm 1,750 lbs 23.5 lbs KM70878052738 4 × KM70878052738

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us