Product Overview

Description

The KMC KM544 Mesa is a cast aluminum wheel in a Matte Bronze with Black Lip finish, offered here in 17, 18 and 20 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Cast Aluminum
  • Finish: Matte Bronze with Black Lip
  • Diameters: 17, 18 and 20 in; width: 9 in
  • Lug counts: 5, 6 and 8
  • Load rating: 2,500–3,640 lbs per wheel, depending on size

Specifications

Brand KMC
Style KM544 Mesa
Finish Matte Bronze with Black Lip
Construction Cast Aluminum
Diameter 17, 18 and 20 in
Width 9 in
Bolt patterns 5x127, 5x150, 6x114.3, 6x135, 6x139.7, 8x165.1, 8x170, 8x180
Lug count 5, 6 and 8
Offset -12 to +25 mm
Centerbore 66.06, 71.5, 87.1, 106.1, 110.1, 124.2, 125.1 mm
Load rating 2,500–3,640 lbs
Beadlock No
Wheel weight 29.9–42.7 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x9 6x139.7 6x5.5 -12 mm 4.53 in 106.1 mm 2,500 lbs 30.7 lbs KM54479068612N 4 × KM54479068612N
17x9 8x165.1 8x6.5 -12 mm 4.53 in 125.1 mm 3,640 lbs 31.8 lbs KM54479080612N 4 × KM54479080612N
17x9 5x127 5x5 +18 mm 5.71 in 71.5 mm 2,500 lbs 31.6 lbs KM54479050618 4 × KM54479050618
17x9 6x114.3 6x4.5 +18 mm 5.71 in 66.06 mm 2,500 lbs 30.6 lbs KM54479064618 4 × KM54479064618
17x9 6x139.7 6x5.5 +18 mm 5.71 in 106.1 mm 2,500 lbs 29.9 lbs KM54479068618 4 × KM54479068618
17x9 8x165.1 8x6.5 +18 mm 5.71 in 125.1 mm 3,640 lbs 31.1 lbs KM54479080618 4 × KM54479080618
18x9 6x114.3 6x4.5 +18 mm 5.71 in 66.06 mm 2,500 lbs 34.4 lbs KM54489064618 4 × KM54489064618
18x9 6x139.7 6x5.5 +18 mm 5.71 in 106.1 mm 2,500 lbs 32.8 lbs KM54489068618 4 × KM54489068618
18x9 8x165.1 8x6.5 +18 mm 5.71 in 125.1 mm 3,640 lbs 34.8 lbs KM54489080618 4 × KM54489080618
18x9 8x170 – +18 mm 5.71 in 125.1 mm 3,640 lbs 34.8 lbs KM54489087618 4 × KM54489087618
18x9 8x180 – +18 mm 5.71 in 124.2 mm 3,640 lbs 35.4 lbs KM54489088618 4 × KM54489088618
20x9 5x127 5x5 +0 mm 5 in 71.5 mm 2,500 lbs 38.6 lbs KM54429050600 4 × KM54429050600
20x9 6x135 – +0 mm 5 in 87.1 mm 2,500 lbs 37.6 lbs KM54429063600 4 × KM54429063600
20x9 6x139.7 6x5.5 +0 mm 5 in 106.1 mm 2,500 lbs 36.9 lbs KM54429068600 4 × KM54429068600
20x9 8x165.1 8x6.5 +0 mm 5 in 125.1 mm 3,640 lbs 39 lbs KM54429080600 4 × KM54429080600
20x9 5x127 5x5 +18 mm 5.71 in 71.5 mm 2,500 lbs 39.6 lbs KM54429050618 4 × KM54429050618
20x9 8x180 – +18 mm 5.71 in 124.2 mm 3,640 lbs 42.7 lbs KM54429088618 4 × KM54429088618
20x9 5x150 – +25 mm 5.98 in 110.1 mm 2,500 lbs 39.5 lbs KM54429058625 4 × KM54429058625

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us