Product Overview

Description

The KMC KM540 Recon is a cast aluminum wheel in a Satin Black finish, offered here in 17 and 18 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Cast Aluminum
  • Finish: Satin Black
  • Diameters: 17 and 18 in; widths: 8.5 and 9 in
  • Lug counts: 5 and 6
  • Load rating: 2,500 lbs per wheel

Specifications

Brand KMC
Style KM540 Recon
Finish Satin Black
Construction Cast Aluminum
Diameter 17 and 18 in
Width 8.5 and 9 in
Bolt patterns 5x127, 5x150, 6x114.3, 6x120, 6x139.7
Lug count 5 and 6
Offset -12 to +18 mm
Centerbore 66.06, 66.9, 71.5, 78.1, 106.1, 106.25, 110.1 mm
Load rating 2,500 lbs
Beadlock No
Wheel weight 30.9–36.8 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8.5 5x127 5x5 +18 mm 5.46 in 71.5 mm 2,500 lbs 32.8 lbs KM54078550718 4 × KM54078550718
17x8.5 6x114.3 6x4.5 +18 mm 5.46 in 66.06 mm 2,500 lbs 32.8 lbs KM54078564718 4 × KM54078564718
17x8.5 6x120 – +18 mm 5.46 in 66.9 mm 2,500 lbs 32.4 lbs KM54078577718 4 × KM54078577718
17x8.5 6x139.7 6x5.5 +18 mm 5.46 in 106.1 mm 2,500 lbs 31.8 lbs KM54078568718 4 × KM54078568718
17x9 5x127 5x5 -12 mm 4.53 in 78.1 mm 2,500 lbs 31.9 lbs KM54079050712N 4 × KM54079050712N
17x9 6x139.7 6x5.5 -12 mm 4.53 in 106.1 mm 2,500 lbs 30.9 lbs KM54079068712N 4 × KM54079068712N
17x9 6x139.7 6x5.5 -2 mm 4.92 in 106.25 mm 2,500 lbs 30.9 lbs KM54079068702N 4 × KM54079068702N
18x8.5 6x120 – +0 mm 4.75 in 66.9 mm 2,500 lbs 33.8 lbs KM54088577700 4 × KM54088577700
18x8.5 6x139.7 6x5.5 +0 mm 4.75 in 106.1 mm 2,500 lbs 32.9 lbs KM54088568700 4 × KM54088568700
18x8.5 5x127 5x5 +18 mm 5.46 in 71.5 mm 2,500 lbs 36.8 lbs KM54088550718 4 × KM54088550718
18x8.5 5x150 – +18 mm 5.46 in 110.1 mm 2,500 lbs 36.2 lbs KM54088558718 4 × KM54088558718
18x8.5 6x114.3 6x4.5 +18 mm 5.46 in 66.06 mm 2,500 lbs 36.6 lbs KM54088564718 4 × KM54088564718
18x8.5 6x139.7 6x5.5 +18 mm 5.46 in 106.1 mm 2,500 lbs 35.3 lbs KM54088568718 4 × KM54088568718

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us