Product Overview

Description

The KMC KM522 Enduro is a cast aluminum wheel in a Matte Black finish, offered here in 15, 16, 17 and 18 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Cast Aluminum
  • Finish: Matte Black
  • Diameters: 15, 16, 17 and 18 in; widths: 7, 8 and 9 in
  • Lug counts: 5, 6 and 8
  • Load rating: 1,900–3,200 lbs per wheel, depending on size

Specifications

Brand KMC
Style KM522 Enduro
Finish Matte Black
Construction Cast Aluminum
Diameter 15, 16, 17 and 18 in
Width 7, 8 and 9 in
Bolt patterns 5x114.3, 5x127, 5x135, 5x139.7, 6x135, 6x139.7, 8x165.1, 8x170
Lug count 5, 6 and 8
Offset -12 to +0 mm
Centerbore 83.7, 94.6, 108, 130.81 mm
Load rating 1,900–3,200 lbs
Beadlock No
Wheel weight 17.7–29.3 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
15x7 5x114.3 5x4.5 -6 mm 3.76 in 83.7 mm 2,100 lbs 17.7 lbs KM52257012706N 4 × KM52257012706N
15x7 6x139.7 6x5.5 -6 mm 3.76 in 108 mm 2,100 lbs 17.7 lbs KM52257060706N 4 × KM52257060706N
15x9 5x114.3 5x4.5 -12 mm 4.53 in 83.7 mm 1,900 lbs 19 lbs KM52259012712N 4 × KM52259012712N
15x9 5x139.7 5x5.5 -12 mm 4.53 in 108 mm 1,900 lbs 19 lbs KM52259055712N 4 × KM52259055712N
16x8 5x114.3 5x4.5 +0 mm 4.5 in 83.7 mm 2,200 lbs 24.6 lbs KM52268012700 4 × KM52268012700
16x8 5x127 5x5 +0 mm 4.5 in 83.7 mm 2,200 lbs 24.6 lbs KM52268050700 4 × KM52268050700
16x8 6x139.7 6x5.5 +0 mm 4.5 in 108 mm 2,200 lbs 24.6 lbs KM52268060700 4 × KM52268060700
16x8 8x165.1 8x6.5 +0 mm 4.5 in 130.81 mm 3,200 lbs 24.6 lbs KM52268080700 4 × KM52268080700
16x9 5x127 5x5 -12 mm 4.53 in 83.7 mm 2,200 lbs 25.4 lbs KM52269050712N 4 × KM52269050712N
16x9 5x135 – -12 mm 4.53 in 94.6 mm 2,200 lbs 25.4 lbs KM52269013712N 4 × KM52269013712N
16x9 6x139.7 6x5.5 -12 mm 4.53 in 108 mm 2,200 lbs 25.4 lbs KM52269060712N 4 × KM52269060712N
17x9 5x127 5x5 -6 mm 4.76 in 83.7 mm 2,200 lbs 27.5 lbs KM52279050706N 4 × KM52279050706N
17x9 6x139.7 6x5.5 -6 mm 4.76 in 108 mm 2,200 lbs 27.5 lbs KM52279060706N 4 × KM52279060706N
18x9 5x127 5x5 +0 mm 5 in 83.7 mm 2,200 lbs 29.3 lbs KM52289050700A 4 × KM52289050700A
18x9 6x135 – +0 mm 5 in 94.6 mm 2,200 lbs 29.3 lbs KM52289063700A 4 × KM52289063700A
18x9 6x139.7 6x5.5 +0 mm 5 in 108 mm 2,200 lbs 29.3 lbs KM52289060700A 4 × KM52289060700A
18x9 8x165.1 8x6.5 +0 mm 5 in 130.81 mm 3,200 lbs 29.3 lbs KM52289080700A 4 × KM52289080700A
18x9 8x170 – +0 mm 5 in 130.81 mm 3,200 lbs 29.3 lbs KM52289087700A 4 × KM52289087700A

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us