Product Overview

Description

The KMC KM451 Mesa Forged Monoblock is a wheel in a Raw Machined finish, offered here in 18 in diameter. Priced per wheel, or as a set of 4.

Key features

  • Construction: Monoblock Forged
  • Finish: Raw Machined
  • Diameter: 18 in; width: 9 in
  • Lug count: 8
  • Load rating: 4,000 lbs per wheel

Specifications

Brand KMC
Style KM451 Mesa Forged Monoblock
Finish Raw Machined
Construction Monoblock Forged
Diameter 18 in
Width 9 in
Bolt patterns 8x165.1, 8x170, 8x180
Lug count 8
Offset -12 to +18 mm
Centerbore 124.2, 125.1 mm
Load rating 4,000 lbs
Beadlock No
Wheel weight 31.5–32.6 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
18x9 8x165.1 8x6.5 -12 mm 4.53 in 125.1 mm 4,000 lbs 32.4 lbs KM451DX18908012N 4 × KM451DX18908012N
18x9 8x170 – -12 mm 4.53 in 125.1 mm 4,000 lbs 32.4 lbs KM451DX18908712N 4 × KM451DX18908712N
18x9 8x180 – -12 mm 4.53 in 124.2 mm 4,000 lbs 32.6 lbs KM451DX18908812N 4 × KM451DX18908812N
18x9 8x165.1 8x6.5 +0 mm 5 in 125.1 mm 4,000 lbs 31.9 lbs KM451DX18908000 4 × KM451DX18908000
18x9 8x170 – +0 mm 5 in 125.1 mm 4,000 lbs 31.9 lbs KM451DX18908700 4 × KM451DX18908700
18x9 8x180 – +0 mm 5 in 124.2 mm 4,000 lbs 32.2 lbs KM451DX18908800 4 × KM451DX18908800
18x9 8x165.1 8x6.5 +18 mm 5.71 in 125.1 mm 4,000 lbs 31.5 lbs KM451DX18908018 4 × KM451DX18908018
18x9 8x170 – +18 mm 5.71 in 125.1 mm 4,000 lbs 31.5 lbs KM451DX18908718 4 × KM451DX18908718
18x9 8x180 – +18 mm 5.71 in 124.2 mm 4,000 lbs 31.5 lbs KM451DX18908818 4 × KM451DX18908818

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us