Product Overview

Description

The KMC KM446 Mesa Forged Monoblock is a wheel in a Satin Black finish, offered here in 17 and 18 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Monoblock Forged
  • Finish: Satin Black
  • Diameters: 17 and 18 in; widths: 8.5 and 9 in
  • Lug count: 6
  • Load rating: 2,500 lbs per wheel

Specifications

Brand KMC
Style KM446 Mesa Forged Monoblock
Finish Satin Black
Construction Monoblock Forged
Diameter 17 and 18 in
Width 8.5 and 9 in
Bolt patterns 6x135, 6x139.7
Lug count 6
Offset -12 to +18 mm
Centerbore 87.1, 106.1 mm
Load rating 2,500 lbs
Beadlock No
Wheel weight 23.8–28 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8.5 6x139.7 6x5.5 -10 mm 4.36 in 106.1 mm 2,500 lbs 24.6 lbs KM446MX17856810N 4 × KM446MX17856810N
17x8.5 6x135 – +0 mm 4.75 in 87.1 mm 2,500 lbs 23.8 lbs KM446MX17856300 4 × KM446MX17856300
18x9 6x135 – -12 mm 4.53 in 87.1 mm 2,500 lbs 28 lbs KM446MX18906312N 4 × KM446MX18906312N
18x9 6x139.7 6x5.5 -12 mm 4.53 in 106.1 mm 2,500 lbs 27.8 lbs KM446MX18906812N 4 × KM446MX18906812N
18x9 6x135 – +0 mm 5 in 87.1 mm 2,500 lbs 27.8 lbs KM446MX18906300 4 × KM446MX18906300
18x9 6x139.7 6x5.5 +0 mm 5 in 106.1 mm 2,500 lbs 27.5 lbs KM446MX18906800 4 × KM446MX18906800
18x9 6x135 – +18 mm 5.71 in 87.1 mm 2,500 lbs 27.3 lbs KM446MX18906318 4 × KM446MX18906318
18x9 6x139.7 6x5.5 +18 mm 5.71 in 106.1 mm 2,500 lbs 27.1 lbs KM446MX18906818 4 × KM446MX18906818

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us