Ground Shaker GS-KF15028B 8" Dual Sealed Sub Box — Fits 09–14 Ford F-150 Ext Cab
Enclosure only — subwoofers not included.
Free shipping on orders over $150
Continental US · processed within 1–2 business days
Ships direct from Ground Shaker in California, usually within 1–2 business days.
Award Winning Sound
2-Year Limited Warranty
Variety of Payment Options
Ground Shaker GS-KF15028B 8" Dual Sealed Sub Box — Fits 09–14 Ford F-150 Ext Cab
Product Overview
Description
If you drive a 09–14 Ford F-150 Ext Cab, this Ground Shaker dual 8" sealed enclosure was shaped for it: it sits under the rear seat and fires down. A sealed design keeps the bass controlled and musical, and it tucks two 8" subs under the seat without giving up the cab. Each woofer gets its own chamber, which keeps them from fighting each other.
Key Features
- Vehicle-specific dual sealed enclosure for the 2009–2014 Ford F-150 Ext Cab — fits under the rear seat
- Holds two 8" subwoofers in 2 individual sealed chambers — 0.68 ft³ per subwoofer, 1.36 ft³ total
- Down-firing design for deep, clean bass under the seat
- Built from ⅝" high-density MDF and carpeted with a durable trunk-liner finish
- Sealed with Titebond silicone and glued with Titebond wood glue for an airtight cabinet
- 2 binding-post terminals for clean, secure wiring
Specifications
| SKU | GS-KF15028B |
| Application | 2009–2014 Ford F-150 Ext Cab |
| Woofer Size | Dual 8" |
| Cutout Diameter | 7⅛" |
| Air Volume | 1.36 ft³ total (2 individual chambers, 0.68 ft³ per subwoofer) |
| Mounting Depth | 5" |
| Enclosure Type | Sealed |
| Firing Direction | Down-firing |
| Front Height | 7½" |
| Rear Height | 3¼" |
| Length | 52¼" |
| Depth | 16¾" |
| Construction | ⅝" high-density MDF, carpeted trunk-liner finish, Titebond silicone seal and wood glue |
| Terminals | 2 binding-post terminals |
| Weight | 37 lbs |
| Color | Black |
Subwoofer option
Add two DS18 SRW8.4 shallow-mount 8" subwoofers — 150W RMS / 300W MAX, SVC 4-ohm, 2.95" mounting depth, 7.12" front-mount cutout per DS18's dimension drawing — and they ship with the box, one per woofer opening. This box is cut 7⅛" with 5" of mounting depth, so the SRW8.4 fits as shipped. Choose "Box only" to buy the enclosure alone.
Box-only option: subwoofers not included. Price is each.
Free shipping on orders $150+
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
FAQs
Please read our FAQs page to find out more.
RMS vs. MAX power — which number do I actually care about?
RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.
What does the IP65 rating on DS18 marine gear actually mean?
It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.
How do I match an amplifier to my speakers without guessing?
Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.
Can I mix marine-grade gear into a standard car audio setup, or the reverse?
You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.
What gauge wiring kit do I need?
It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.