Product Overview

Description

Key Features

  • Vehicle-specific dual sealed enclosure for the 2009–2026 Ford F-150 Crew Cab — fits under the rear seat
  • Holds two 8" subwoofers with 1.32 ft³ of total sealed air volume
  • Down-firing design for deep, clean bass under the seat
  • Built from ⅝" high-quality MDF and carpeted with a durable trunk-liner finish
  • Sealed with Titebond silicone and glued with Titebond wood glue for an airtight cabinet
  • 2 binding-post terminals for clean, secure wiring
  • Note: subwoofers with wide magnets/baskets may not fit

Specifications

SKU GS-DF15028B
Application 2009–2026 Ford F-150 Crew Cab
Woofer Size Dual 8"
Cutout Diameter 7⅛"
Air Volume 1.32 ft³
Mounting Depth 5¼"
Enclosure Type Sealed
Firing Direction Down-firing
Front Height 7¼"
Rear Height 5¼"
Length 55"
Top Depth 13¾"
Bottom Depth 11"
Construction ⅝" high-quality MDF, carpeted trunk-liner finish, Titebond silicone seal and wood glue
Terminals 2 binding-post terminals
Weight 34 lbs
Color Black

Subwoofers not included. Price is each.

Free shipping on orders $100+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us