Jeep Wrangler JL · 2018+ · Gas
3.5" Lift Enforcer Suspension System
EVO MFG · EVO-3013S3
Built to order. Ships in 1 to 8 weeks — we confirm your build date within 1 business day.
Flat-rate freight is added at checkout — complete lift kits $300. Orders over $8,500 ship free.
Variety of Payment Options
EVO MFG Jeep Wrangler JL 2018+ Gas 3.5" Lift Enforcer Suspension System
Product Overview
Description
EVO MFG 3.5" Lift Enforcer Suspension System for the Jeep Wrangler JL 2018+, Gas. Offered in 40 configurations: choose Stage, Shocks and Track Bars above.
The EVO MFG 3.5" JL Enforcer Lift Suspension Systems lift your 2018 and up Jeep Wrangler JL 3.5". The JL Enforcer kits are specifically designed to lift your JL and maintain a performance spring rate and smooth ride quality, with your choice of aftermarket 3-5 inch lift shocks or EVO's SPEC 2.5 inch Remote Reservoir King Shocks. These kits come with a set of 3.5" lift springs specific to each corner which will keep the Jeep Wrangler JL level side to side. 3.5" kits raise the rear track bar to center the axle and correct roll center for improved handling.
When a vehicle is lifted, the control arms sit at a steeper angle at ride height, which can cause some chop in ride quality; on Overland stages, the included Overland Control Arm Brackets relocate the front control arm frame mounts to keep flatter, factory-like control arm angles and reduce that chop. Both the standard and Overland kits drive well; the Overland kits are better suited for light off-road and on-road use than for hard off-road crawling. The EVO MFG 3.5" JL Enforcer Kits are easy to install using normal tools. Installation is a simple bolt-on.
Configurations
- Overland: The difference with EVO MFG Enforcer Overland systems vs EVO MFG Enforcer systems is the use of front Overland Control Arm Brackets.
- Stage 1 (base for Stage 3 and 4 kits): includes all the minimum necessary parts to lift your JL 3.5".
- Stage 2 (base for Stage 3 kits): Stage 1 components plus EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.
- Stage 3 kits include Stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.
- Stage 4 kits include Stage 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.
- K kits: K Kits include EVO SPEC King Shocks.
Fitment
| Fits | Jeep Wrangler JL, 2018+ |
| Engine | Gas |
| Lift note | 3.5" lift is based on increase of a 4 Door Rubicon. |
| Lift note | 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. |
| Lift note | 2 Door Models (all) will see slightly higher increases in lift. |
| Lift note | Lift increases will vary. |
| Required | These kits require wheel spacers or aftermarket wheels with smaller backspacing. |
| Required | An adjustable front track bar is required to complete proper installation (included only when the Front / Rear Track Bars option is selected). |
| Installation | No drilling or cutting (optional rear shock extensions require one minor drill). |
| Installation | Depending on actual tire sizes, some trimming of body sheet metal, fenders, bumpers and inner fender liner may be required to fully clear tires under compression. |
| Note | These kits require no driveshaft or exhaust modifications (your shock choice may require this; contact the shock manufacturer to be sure). |
| Note | When paired with packaged shocks, these kits will not require driveshaft replacement. |
Confirm your exact model year, body style, trim and engine before ordering.
Specifications
| Brand | EVO MFG |
| Product type | Suspension System |
| Part numbers | 40 configurations, each with its own EVO part number (shown with the selected option) |
| Installation time (EVO) | Stage 3 Overland kit: 6.0-8.0 hours |
| Mount style | Bolt-On |
| Hardware included | Yes |