Product Overview

Description

EVO MFG 6.5" Lift Enforcer Suspension System for the Jeep Gladiator JT 2020+, Diesel. Offered in 12 configurations: choose Stage, Shocks and Track Bars above.

The JT Enforcer kits are specifically designed and engineered to lift your JT and maintain a performance spring rate, smooth ride quality all while retaining tow capacities. These kits allow for use of your choice of any aftermarket 6" lift shock or use of EVO's SPEC tuned 2.5" Remote Reservoir King Shocks. These kits come with a set of 6.5" lift springs specific to the Jeep Gladiator Diesel that remove most of the factory rake to level the stock truck. When a vehicle is lifted, the control arms sit at a steeper angle at ride height, which can cause some chop in ride quality; on Overland stages, the included Overland Control Arm Brackets relocate the front control arm frame mounts to keep flatter, factory-like control arm angles and reduce that chop.

Both the standard and Overland kits drive well; the Overland kits are better suited for light off-road and on-road use than for hard off-road crawling. The EVO MFG 6.5" JT Enforcer Kits are easy to install using normal tools. Installation is a simple bolt-on. All included Enforcer Arms use only rebuildable free articulating spherical bearings on all ends of each arm giving restriction free travel and articulation.

Configurations

  • Overland: The difference with EVO MFG Enforcer Overland systems vs EVO MFG Enforcer systems is the use of front Overland Control Arm Brackets.
  • Plus ("P"): Front and rear adjustable track bars to fine tune axle center are included with PLUS "P" kits.
  • K kits: "K" Kits include a set of 4 EVO SPEC Remote Reservoir King Shocks.

Fitment

Fits Jeep Gladiator JT, 2020+
Engine Diesel
Fits All trims: Sport, Overland, Rubicon, Mojave.
Required These kits require wheel spacers or aftermarket wheels with smaller backspacing and aftermarket front driveshaft.
Required 6.5" Gladiator kits require an aftermarket front driveshaft.
Installation No drilling or cutting.
Note Front lower and rear upper adjustable control arms and front and rear adjustable track bars are required for proper alignment and installation on 6.5" JT lifts; these components are included in every Stage 3 and Stage 4 configuration of this kit.
Note These kits require no exhaust modifications.
Recommended EVO-3027B JL/JT Protek Front Shock Relocation Brackets (sold separately) are recommended with 2.5" King shocks or with all larger aftermarket shock options.
Recommended A rear aftermarket driveshaft (sold separately) is recommended. One of many manufacturers is JE Reel. Check with the manufacturer for compatibility.
Optional (sold separately) EVO-3097VD Front Inner Fenders.
Optional (sold separately) EVO-600081KB Front Air Bumps.

Confirm your exact model year, body style, trim and engine before ordering.

Specifications

Brand EVO MFG
Product type Suspension System
Part numbers EVO-3064S3DP: STAGE 3 / No Shocks / Front / Rear Track Bars; EVO-3064S3DPK: STAGE 3 / King 2.5" Shocks / Front / Rear Track Bars; EVO-3064S3DPKA: STAGE 3 / King 2.5" Shocks with Compression Adjusters / Front / Rear Track Bars; EVO-3065S3DP: STAGE 3 Overland / No Shocks / Front / Rear Track Bars; EVO-3065S3DPK: STAGE 3 Overland / King 2.5" Shocks / Front / Rear Track Bars; EVO-3065S3DPKA: STAGE 3 Overland / King 2.5" Shocks with Compression Adjusters / Front / Rear Track Bars; EVO-3064S4DP: STAGE 4 / No Shocks / Front / Rear Track Bars; EVO-3064S4DPK: STAGE 4 / King 2.5" Shocks / Front / Rear Track Bars; EVO-3064S4DPKA: STAGE 4 / King 2.5" Shocks with Compression Adjusters / Front / Rear Track Bars; EVO-3065S4DP: STAGE 4 Overland / No Shocks / Front / Rear Track Bars; EVO-3065S4DPK: STAGE 4 Overland / King 2.5" Shocks / Front / Rear Track Bars; EVO-3065S4DPKA: STAGE 4 Overland / King 2.5" Shocks with Compression Adjusters / Front / Rear Track Bars