Product Overview

Description

Key Features

  • Digital LED lighting
  • Fits 2015 - Current
  • IP65 rated
  • Vehicle-specific for the Polaris Slingshot

Product Overview

Feel the bass in your Polaris Slingshot with DS18’s SLG-RSUB10LD: a subwoofer enclosure installed in the Rear Storage Compartment behind Polaris Slingshot seats!

Adding this durable 10” Subwoofer Enclosure into your Polaris Slingshot’s sound system will instantly increase the quality and feel of the bass response it reproduces.

Fitted perfectly for rear storage compartments in all Polaris Slingshot models, when combined with all enclosures in our SLG series, the SLG-RSUB10LD reinforces an impenetrable soundstage designed to cut through the noise of the open road!

The high powered NXL-10SUB was built to bring the bass on your Slingshot to life. Designed with an IP65 marine-grade frame, this 10-inch subwoofer is guaranteed to deliver hard-hitting bass that will stand up to the elements. Plus, its UV compliant cone and butyl rubber surround make it stable enough to withstand the open air design of the Slingshot. Not only does the NXL-10SUB bring the BOOM with its 300 watts RMS and 600 watts max power handling and 4-Ohm impedance, it also features integrated RGB lights that can be connected to any RGB 4-wire circuit for a customizable ambiance that will match your mood or color scheme.

Install this subwoofer enclosure into your Polaris Slingshot’s sound system seamlessly through use of the factory bolts and mounting location.

Specifications

SKU SLG-RSUB10LD
Application Polaris Slingshot
Sold As Each

Free shipping on orders $100+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us