DS18 PRO-DR1.75 1" Throat Twist-On Driver, 1.75" Titanium VC, 8-Ohm — 600W MAX
Free shipping on orders over $150
Continental US · processed within 1–2 business days
In stock! Ships within 2 business days.
Award Winning Sound
2-Year Limited Warranty
Variety of Payment Options
DS18 PRO-DR1.75 1" Throat Twist-On Driver, 1.75" Titanium VC, 8-Ohm — 600W MAX
Product Overview
Description
A 1" twist-on compression driver with a 1.75" titanium voice coil, the DS18 PRO-DR1.75 handles 300W RMS and 600W max at 8 ohms. It suits anyone building a pro-audio or stunt-wall system who wants highs that carry over big mids. Frequency response runs 500Hz to 20KHz, wider than most horn drivers, and the coil swaps out in minutes if it ever gets pushed too hard.
Overview
DS18 PRO-DR1.75 1" Twist On Throat Compression Driver with 1.75" Titanium VC 600 Watts 8 ohm
With the ever evolving PRO audio that DS18 provides, we are happy to present out next evolution of driver, the PRO DS1.75 Titanium Compression Driver! This 1.75-inch driver features a titanium compression diaphragm RMS rating states a handling of 300W RMS and 600W MAX power. These compression horns have a great frequency response of 500Hz to 20KHz, so they can play a much wider range than normal.
Key Features
- High powered DS18 high frequency driver made to blast the high frequencies for all to be heard.
- Compatible with all DS18 screw on throats of various sizes and colors so you can get the perfect look and fitment for your system.
- High quality terminals making connectivity secure and easy.
- Easily exchange voice coils in minutes.
Specifications
| SKU | PRO-DR1.75 |
| RMS Power | 300W |
| MAX Power | 600W |
| Sensitivity | 107dB |
| Voice Coil Size | 1.75" |
| Frequency Response | 500Hz-20KHz |
| Diaphragm Material | Titanium |
Price is each.
Free shipping on orders $150+
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
FAQs
Please read our FAQs page to find out more.
RMS vs. MAX power — which number do I actually care about?
RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.
What does the IP65 rating on DS18 marine gear actually mean?
It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.
How do I match an amplifier to my speakers without guessing?
Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.
Can I mix marine-grade gear into a standard car audio setup, or the reverse?
You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.
What gauge wiring kit do I need?
It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.