DS18 PRO-DKH1 2" Driver and Horn Kit, 2" Titanium VC, 8-Ohm (PRO-D1+PRO-HA102/BK) — 640W MAX
Free shipping on orders over $150
Continental US · processed within 1–2 business days
In stock! Ships within 2 business days.
Award Winning Sound
2-Year Limited Warranty
Variety of Payment Options
DS18 PRO-DKH1 2" Driver and Horn Kit, 2" Titanium VC, 8-Ohm (PRO-D1+PRO-HA102/BK) — 640W MAX
Product Overview
Description
The PRO-DKH1 combines the PRO-D1 2" bolt-on compression driver with the full-size PRO-HA102/BK aluminum horn, rated 160W AES and 640W MAX at 8 ohms. This is the loud, carrying top end for pro-audio and voceteo setups where a bullet tweeter runs out of reach. It hits 111dB sensitivity, needs 7.18" of mounting depth, and the horn carries a brushed DS18 logo.
Overview
DS18 PRO-DKH1 2" Bolt On Throat Compression Driver 2" Throat Titanium VC and PRO-HA102/BK Horn 640 Watts 111dB 8 ohm Mounting Depth 7.18"
Engineered and Designed in the US, the DS18 Compression Drivers with aluminum horns are the top of the line high frequency driver/tweeter/horns in the market. These bad boys deliver so much power that you'd think with one horn your whole sound system is ready to deploy for a major concert. Simply put, there are no compression drivers that can compare to the sophistication, beauty, and precision of these horns especially in the Pro Audio/Voceteo World.
Key Features
- Full size aluminum throat horn with a brushed DS18 logo for maximum loudness and aesthetics.
- New redesigned backplate for an amazing look.
- High wattage driver requiring 160w AES power and 640w Max for ear blasting high range frequencies.
Specifications
| SKU | PRO-DKH1 |
| Peak Power Handling | 640 Watts |
| Program Power handling | 320 Watts |
| AES Rated Power | 160 Watts |
Price is each.
Free shipping on orders $150+
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
FAQs
Please read our FAQs page to find out more.
RMS vs. MAX power — which number do I actually care about?
RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.
What does the IP65 rating on DS18 marine gear actually mean?
It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.
How do I match an amplifier to my speakers without guessing?
Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.
Can I mix marine-grade gear into a standard car audio setup, or the reverse?
You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.
What gauge wiring kit do I need?
It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.