Product Overview

Description

Product Overview

DS18 NXL-10SUB/BK

10” Marine Water Resistant Subwoofer With Integrated RGB LED Lights 600W SVC 4-Ohm - Black

Experience the ultimate in powerful and immersive sound with DS18’s NXL-10SUB/BK!
Specially designed for marine and outdoor applications, the NXL-10SUB/BK is built to withstand any weather condition while delivering mind-blowing bass. This powerful subwoofer now comes with a free silicon cover for added protection against the elements when not in use.
The NXL-10SUB’s high-temp injection-molded composite construction and detachable stainless-steel mesh grills offer resilience, protection and endless customization. With its IP65 waterproof frame, this 10-inch subwoofer is guaranteed to bring more BOOM to your marine audio system. Whether you're on a boat, off-roading, or simply enjoying the great outdoors, this subwoofer will provide exceptional performance that stands up to the elements.
Not only does the NXL-10SUB/BK offer impressive durability, but it also features built-in RGB lights that add a stunning touch to your application's color scheme. Connect it to any RGB 4-wire circuit and create a mesmerizing ambiance that sets you apart from the rest. For optimal control and customization, we recommend using DS18’s LED-BTC (sold separately).
Equipped with a single 4-ohm voice coil and a highly durable 2-inch voice coil former, the NXL-10SUB/BK can handle 300W RMS and 600W MAX power. Its powerful ferrite magnet and UV compliant cone materials ensure sustained and hard-hitting bass that will leave you in awe.
Designed for sealed and ported boxes, DS18’s NXL-10SUB/BK is engineered to deliver the best results. Its UV-compliant, marine-grade construction guarantees stability even in harsh environments.
Enhance your audio experience with DS18’s NXL-10SUB/BK to feel the music like never before.

SPECS

SPECS
SKU NXL-10SUB/BK
Nominal Diameter 10" / 254mm
Nominal Impedance 4 ohm
RMS Power Handing 300W
Maximum Power Handing 600W
Sensitivity (1w/1m) 89dB
Frequency Response 35-250Hz
Recommended Lo Pass Crossover 100Hz
SPECS
Voice Coil Diameter 2" / 50.8mm
Voice Coil Former Material Glass Fiber
Winding Material CCAW
Basket Material High Temp Injection Molded Composite with UV Protection coating
Magnet Weight 72 oz
THIELE & SMALL PARAMETERS
Vas 26.7L / 0.94ft3
Fs 45Hz
Qms 8.919
Qes 0.805
Qts 0.457
Re 3.65 ohm
MEASUREMENTS
Overall Diameter 10.76" / 273.3mm
Front Mount Baffle Cutout 8.78" / 223mm
Mounting Depth 5" / 127.5mm
Overall Depth 6.73" / 171mm
Product Weight 14 lbs
Product Dimensions 13.25 x 13.25 x 8.75
M/C Weight 30 lbs
M/C Dimensions 26.75 x 13.75 x 9.5
M/C QTY 2
Sold In Piece

Free shipping on orders $100+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us